Wachendorff Prozesstechnik GmbH & Co. KG Industriestrasse 7 D-65366 Geisenheim Tel.: +49 (0) 67 22 / 99 65 - 20 Fax: +49 (0) 67 22 / 99 65 - 78 www.wachendorff.de Tachometer TA327401 Excitation: 24 VDC Tachometer with rotating direction indication in 32mmx74mm - 30 mA( 24 VAC power supply) Format - 40 mA(24 VDC power supply) Universal AC/DC power supply - 60 mA(110 bis 230 VAC power supply). Input frequency up to 100 kHz 2-line LED display Supply: Easy programming by front keys or software 24VAC/DC to 230 VAC/DC +/-15 %, 50/60Hz 2 W Two relay outputs Data security: Password-protected access to setpoint, alarm values and parameters. Programming: Programming and operation is menu-guided via the front keys. With the programming kit, the controller can also be programmed by a Windows - software. The memory card has an internal battery. Thus, the programming of the devices is possible without the supply (up to 1000 programming with a battery). Wiring plan: TA327401 The compact small tachometer TA327401 allows to read the frequency (max 100KHz) of a signal from single or double (bidirectional encoder) input. 2 universal digital inputs are available (NPN/PNP/contact) for external commands like output activation or Hold/ Stop current visualization one input it is also analogue in order to allow setpoint modification by external potentiometers. Due to the two different modes and the indivation of the rotating direction, the tachometer is usable for a lot of different applications. In addition to an excellent cost effectiveness and high quality, the counter TA327401 offers a rugged, compact housing and a brilliant display. Display: 2-line LED-Display Protection class: IP65 from the front (with rubber sealing), back plane Upper line: Counting value, 4-digit, green with 10.2 mm digits IP20. Lower line: Setpoint, 4-digit, red with 7,6 mm digits Housing: Black and robust plastic case, PC ABS UL94V0 self- Indicators: Two red indicators for status relays outputs and a yellow extinguishing. indicator for serial communication. 1, 2: ON, when output active Dimensions: W 77 mm x H 35 mm x D 53 mm. Panel cut out 28,5 mm x R: ON when serial communication is active 70,5 mm. Buttons: 4 front keys for programming and setting up the setpoints. Connection: Via screw terminal. Inputs: Three digital inputs can be configured as PNP, NPN or Ambient conditions: Operating temperature: 0 C to +40 C relative TTL.Programmable thresholds for activation as a high / low active humidity 35 % to 95 %. rF, non condensing. active / rising edge or level triggered. Weight: 100 gramms. Input NPN PNP TTL signal Logic Scope of delivery: Controller, mounting clamp, sealing, manual. level >5,7 V (I1, I2) High < 4,7 V >2,5 V >12,4 v (I3) < 4,7 V (I1, I2) Low > 5,7 V < 2,0 V < 10,2 V (I3) Input I3 can also be used for connection of a potentiometer (0 to 5/10 kOhm) for setting the nominal value (resolution: 1,000 steps). Function of inputs: Lock, hold, counting direction, setpoint input (I3). Order codes Input frequency: Min 1 Hz to max. 100 kHz. Type Order-No. Relay output: 1 change over relay with 5 A 250 VAC and 1 closing contact with 5A 250 VAC.. Tachometer, 230 VAC/VDC TA327401 Accessories Programming module with USB cable SFUR0KIT Software download under: X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for wachendorff manufacturer: Other Similar products are found below : Wachendorff