4 4 3 3 2 2 1 1 750-333 PROFIBUS DP/V1 Fieldbus Coupler 4 12 Mbaud digital and analog signals 138 Status PROFIBUS 01 02 voltage supply A RUN C -System B -Power jumper contacts BF D Data Contacts DIA 24V 0V BUS Supply Fieldbus 24 V connection 0 V D-Sub I/O + + Supply via power jumper contacts 24 V ADDRESS x1 0 Address 0 V x10 0 Address Conguration Power jumper contacts interface This buscoupler interfaces the I/O modules of the WAGO-I/O-SYSTEM to It is furthermore possible to deactive I/O modules and to modify the image of PROFIBUS DP. the node according to the connected signals without having to modify the existing application. When initializing, the buscoupler determines the module structure of the node, to create the process image in PROFIBUS. In order to optimize addresses, the The diagnosis concept is based on diagnostics according to the EN 50170 I/O modules with a bit width smaller than 8 are grouped in one byte. standard. Therefore the programming of modules is not necessary to interpret the diagnostic information from each manufacturer. Notice: GSD files required Pack. Item No. Description System Data Unit PROFIBUS DP/V1 12MBd 750-333 1 No. of couplers connected to Master 96 with repeater PROFIBUS DP/V1/T 750-333/025-000 1 Max. no. of I/O points approx. 6000 (depends on master) Extended temperature range: -20 C ... +60 C Transmission medium Cu cable acc. to EN 50170 Max. length of fieldbus segment 100 m ... 1200 m (depends on baud rate/cable) Baud rate 9.6 Kbaud ... 12 Mbaud Pack. Transmission time typ. 1 ms (10 couplers 32 digital I/Os Accessories Item No. Unit per coupler at 12 Mbaud) max. 3.3 ms GSD files Download: www.wago.com Buscoupler connection 1 x D-Sub 9 socket Miniature WSB Quick marking system plain 248-501 5 with marking see Section 11 Standards and Approvals Standard EN 50170 Conformity marking 1 Korea Certification Marine applications (versions upon request) ABS, BV, DNV, GL, KR, LR, NKK, PRS, RINA r UL 508 r ANSI/ISA 12.12.01 Class I, Div. 2, Grp. ABCD, T4 TV 12.1297 X (Brazil) Ex nA IIC T4 Gc 4 TV 07 ATEX 554086 X I M2 Ex d I Mb, II 3 G Ex nA IIC T4 Gc, II 3 D Ex tc IIIC T135C Dc IECEx TUN 09.0001 X Ex d I Mb, Ex nA IIC T4 Gc, Ex tc IIIC T135C Dc WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 - D-32385 Minden Tel.: +49(0)571/887-0 E-Mail: info wago.com Subject to design changes 26.01.2016 Hansastr. 27 - D-32423 Minden Fax: +49(0)571/887-169 www.wago.com 9 9 8 8 W 750-333 7 7 6 6 5 5 4 139 I/O modules 24 V 1 5 24 V ELECTRONICS 5 V 10 nF 24 V /0 V 5 V 0 V 2 6 24 V 24 V FIELDBUS INTERFACE 3 7 0 V 0 V 10 nF 4 8 750-333 Technical Data General Specifications Number of I/O modules 63 Operating temperature 0 C ... +55 C Max. input process image 244 bytes Wire connection CAGE CLAMP Max. output process image 244 bytes Cross sections 0.08 mm ... 2.5 mm / AWG 28 ... 14 Configuration via PC or PLC Strip lengths 8 ... 9 mm / 0.33 in Power supply 24 V DC (-25 % ... +30 %) Dimensions (mm) W x H x L 51 x 65 x 100 Max. input current (24 V) 500 mA Height from upper-edge of DIN 35 rail Power supply efficiency 87 % Weight 183.1 g Internal current consumption (5 V) 200 mA Storage temperature -25 C ... +85 C Total current for I/O modules (5 V) 1800 mA Relative air humidity (no condensation) 95 % Isolation 500 V system/supply Vibration resistance acc. to IEC 60068-2-6 Voltage via power jumper contacts 24 V DC (-25 % ... +30 %) Shock resistance acc. to IEC 60068-2-27 Current via power jumper contacts (max.) 10 A DC Degree of protection IP20 4.1 EMC immunity of interference acc. to EN 61000-6-2, marine applications EMC emission of interference acc. to EN 61000-6-4, marine applications FIELDBUS INTERFACE ELECTRONICS