Data sheet... Weidmller Interface GmbH & Co. KG SAK Series Klingenbergstrae 16 SAKS 3 Z/6.3X26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com The fuse terminals of the Weidmller SAK series are available in two different forms: Fuse terminal with pivoting retaining lever Fuse terminal with screwed cap General ordering data Type SAKS 3 Z/6.3X26 Order No. 0211120000 GTIN (EAN) 4008190177331 Qty. 20 pc(s). Creation date August 16, 2013 12:43:44 PM CEST Catalogue status 08.07.2013 / We reserve the right to make technical changes. 1Data sheet... Weidmller Interface GmbH & Co. KG SAK Series Klingenbergstrae 16 SAKS 3 Z/6.3X26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Length 54 mm Width 13 mm Height 61 mm Height of lowest version 61 mm Net weight 46.35 g Temperatures Operating temperature Storage temperature Continuous operating temp., min. -60 C Continuous operating temp., max. 130 C Rated data IECEx/ATEX Certificate No. (ATEX) SIRA03ATEX4289U ATEX certificate IECEXSIR05.0034U ATEX certificate SIRA03ATEX4289U e.pdf Certificate No. (IECEX) IECEXSIR05.0034U IEC Ex certificate IECEXSIR05.0034U e.pdf Max. voltage (ATEX) 630 V Current (ATEX) 10 A Wire cross section max. (ATEX) 10 mm Voltage, cross-connection Operating temperature range For operating temperature range see EC Design Test Certificate / IEC Ex- CrossConnectionGuide.pdf Certificate of Conformity Marking ATEX Directive 94/9/EC II 2 G D Additional technical data Explosion-tested version No Installation advice Direct mounting Number of similar terminals 1 Open sides right Type of mounting Version Screw connection, Fuse cartridge, One end without Snap-on connector CSA ratings data Certificate No. (CSA) 12400-198 Voltage size C (CSA) 600 V Current size C (CSA) 10 A Wire cross section max. (CSA) 10 AWG Wire cross section min. (CSA) 22 AWG Clampable wires (rated connection) Type of connection Screw connection Stripping length 12 mm Blade size 1.0 x 5.5 mm Connection direction on side Number of connections 2 Clamping range, rated connection, min. 0.33 mm Clamping range, rated connection, max. 16 mm Clamping screw M 4 Tightening torque, min. 1.2 Nm Tightening torque, max. 2.4 Nm Torque level with DMS electric Gauge to IEC 60947-1 screwdriver 4 B6 Wire connection cross section, solid Wire connection cross section, solid core, max. rated connection 0.5 mm core max. rated connection 16 mm Wire connection cross section, stranded, Wire connection cross section, stranded, rated connection, min. 1.5 mm rated connection, max. 10 mm Wire connection cross section, finely Wire connection cross-section, finely stranded, max. 10 mm stranded, min. 0.5 mm Wire connection cross section, finely Wire connection cross section, finely stranded with wire-end ferrules DIN stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm 46228/1, rated connection, max. 10 mm Wire connection cross section AWG, Wire connection cross section AWG, min. AWG 22 max. AWG 10 Creation date August 16, 2013 12:43:44 PM CEST Catalogue status 08.07.2013 / We reserve the right to make technical changes. 2