MPX21W3470FK00MSSD WIMA

D WIMA MP 3-X2 Metallized Paper (MP) RFI-Capacitors Class X2 in PCM 10 mm to 27.5 mm. Capacitances from 1000 pF to 1.0 mF. Rated Voltages 250 VAC and 275 VAC. Special Features Electrical Data Particularly high reliability against Capacitance range: Maximum pulse rise time: active and passive flammability 1000 pF to 1.0 mF (E12-values on request) Capacitance Pulse rise time V/msec Excellent self-healing as well as Rated voltages: 250 VAC, 275 VAC pF/mF max. operation high voltage strength Continuous DC voltage* (general guide): 1000 ... 0.068 1500 High degree of interference T 630 V 0.1 ... 0.33 750 suppression due to good Capacitance tolerances: 20% 0.47 500 attenuation and low ESR Operating temperature range: 0.68 ... 1.0 250 For temperatures up to +110 C 40) C to +110) C According to RoHS 2011/65/EU Climatic test category: for pulses equal to a voltage amplitude 40/110/56/C in accordance with IEC with 2 x UAC = 390 V Insulation resistance at +20+ C: Typical Applications according to IEC 60384-14 3 C T 0.33 mF: 12 x 10 M Test voltage: 1300 VDC, 2 sec. C 0.33 mF: 4000 sec (M x mF) Class X2 RFI applications to meet Reliability: Measuring voltage: 100 V/1 min. EMC regulations Operational life 300 000 hours Dissipation factors: Capacitors connected to the mains Failure rate 1 fit (0.5 x U and 40) C) r 3 tan d T 13 x 10 at 1 kHz and +20+ C between phase and neutral or Test specifications: phase and phase conductors In accordance with IEC 60384-14 General requirements, pulse peak Approvals: voltage T 2.5 kV Country Authority Specification Symbol Approval-No. Construction V D E Germany VDE IEC 60384-14 89749 Dielectric: EN 60384-14 Paper, epoxy resin impregnated Capacitor electrodes: USA/Canada UL UL 60384-14 E 100438 Vacuum-deposited CAN/CSA-E60384-14 Internal construction: Capacitor paper Mounting Recommendation Packing Vacuum-deposited electrode Metal contact layer To minimize or avoid shock and/or Available taped and reeled up to and (schoopage) vibration stresses to terminating wires including PCM 22.5 mm. Terminating wire and solder connections we recommend to fix voluminous resin-potted MP capacitors Detailed taping information and graphs as from e.g. PCM 22.5 mm in an at the end of the catalogue. appropriate way since for constructional reasons they do not sit tight on the For further details and graphs please Encapsulation: board. refer to Technical Information. Self-extinguishing epoxy resin, UL 94 V-0, metal foil Terminations: * If safety-approved EMI suppression Tinned wire. capacitors are operated with a DC vol- Marking: tage being above the specified AC voltage Marking: Black on Silver. rating the given approvals are no longer valid (IEC 60384-14). Furthermore the permissible pulse rise time du/dt (F ) will be subject to a reduction max. according to F = F x 2 x UAC / UDC max. r if the DC operating voltage UDC is higher than 2 x UAC 87 04.160.47-- -- -- 1.0F PCM275 0.15 -- 0.22 -- --0.33F PCM22.5 -- 1000 pF -- 2200 pF PCM 10 -- 4700 pF -- 6800 pF -- 0.01 F -- 0.022 F PCM 15 -- 0.047 F -- 0.1 F D WIMA MP 3-X2 Continuation General Data 250 VAC* 275 VAC* Capacitance W H L PCM** Part number W H L PCM** Part number 1000 pF 4 8.5 13.5 10 MPX20W1100FA00 4 8.5 13.5 10 MPX21W1100FA00 1500 4 8.5 13.5 10 MPX20W1150FA00 4 8.5 13.5 10 MPX21W1150FA00 2200 4 8.5 13.5 10 MPX20W1220FA00 4 8.5 13.5 10 MPX21W1220FA00 3300 4 8.5 13.5 10 MPX20W1330FA00 4 8.5 13.5 10 MPX21W1330FA00 4700 5 10 13.5 10 MPX20W1470FB00 5 10 13.5 10 MPX21W1470FB00 6800 5 13 19 15 MPX20W1680FC00 5 13 19 15 MPX21W1680FC00 0.01 mF 5 13 19 15 MPX20W2100FC00 5 13 19 15 MPX21W2100FC00 0.015 5 13 19 15 MPX20W2150FC00 5 13 19 15 MPX21W2150FC00 0.022 5 13 19 15 MPX20W2220FC00 5 13 19 15 MPX21W2220FC00 0.033 6 14 19 15 MPX20W2330FD00 6 14 19 15 MPX21W2330FD00 0.047 7 15 19 15 MPX20W2470FE00 7 15 19 15 MPX21W2470FE00 0.068 8 17 19 15 MPX20W2680FF00 8 17 19 15 MPX21W2680FF00 0.1 mF 10 18 19 15 MPX20W3100FG00 10 18 19 15 MPX21W3100FG00 8 20 28 22.5 MPX20W3100FH00 8 20 28 22.5 MPX21W3100FH00 0.15 8 20 28 22.5 MPX20W3150FH00 8 20 28 22.5 MPX21W3150FH00 0.22 10 22 28 22.5 MPX20W3220FI00 10 22 28 22.5 MPX21W3220FI00 0.33 12 24 28 22.5 MPX20W3330FJ00 12 24 28 22.5 MPX21W3330FJ00 0.47 13 25 33 27.5 MPX20W3470FK00 13 25 33 27.5 MPX21W3470FK00 0.68 15 26 33 27.5 MPX20W3680FL00 15 26 33 27.5 MPX21W3680FL00 1.0 mF 20 32 33 27.5 MPX20W4100FM00 20 32 33 27.5 MPX21W4100FM00 * f = 50/60 Hz Part number completion: ** PCM = Printed circuit module = pin spacing Tolerance: 20 % = M Upon request with long pins 35-2 mm max. Packing: bulk = S Pin length: 6-2 = SD Dims. in mm. Taped version see page 145. W L 10 Z H 1 7 5 3 d = 0.6 P if PCM 10 6-2 0.1 d = 0.8 P if PCM U 15 d PCM 7 at the pin exit 5 points 3 (0.5) 0.01 0.1 35 731157 0 35 7100 1000 f/MHz Impedance change with frequency (general guide) Rights reserved to amend design data without prior notification. 88 04.16