Dimensions: mm Applicable Cable Diameter: mm Electrical Properties: Properties Test conditions Value Unit Tol. Impedance 25 MHz 1 turn 25 MHz Z 80 25% Impedance 100 MHz 1 turn 100 MHz Z 167 25% Impedance 25 MHz 2 turns 25 MHz Z 221 typ. 31,5 1,0 16,0 0,4 Impedance 100 MHz 2 turns 100 MHz Z 350 typ. <= 18.5 mm Scale - 1:1 19,0 0,8 General Information: Storage Temperature (in original -20 C up to +60 C packaging) Operating Temperature -25 C up to +125 C Test conditions of Electrical Properties: +20 C, 33% RH if not specified differently Scale - 1:1 CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions FBo AlMo DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg Germany WE-TOF EMI Suppression Toroidal Tel. +49 (0) 79 42 945 - 0 ORDER CODE Ferrite www.we-online.com 74270115 eiSos we-online.com REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 005.006 Valid 2018-05-29 eiSos 1/4 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.General Properties: Typical Impedance Characteristics: Properties Value Unit Tol. 1000 Cable Diameter Max. 18.5 mm Material 3 W 800 Initial Permeability 800 typ. i Curie Temperature T 140 C typ. C Test Cable AWG26 Test Cable Length 165 mm 100 10 1 1 10 100 1000 Frequency MHz 1 turn 2 turns CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions FBo AlMo DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg Germany WE-TOF EMI Suppression Toroidal Tel. +49 (0) 79 42 945 - 0 ORDER CODE Ferrite www.we-online.com 74270115 eiSos we-online.com REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 005.006 Valid 2018-05-29 eiSos 2/4 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Impedance
