0 Virtex-5 FPGA Data Sheet: DC and Switching Characteristics 00 DS202 (v5.5) June 17, 2016 Product Specification Virtex-5 FPGA Electrical Characteristics Virtex-5 FPGAs are available in -3, -2, -1 speed grades, Virtex-5 Family Overview with -3 having the highest performance. Virtex-5 FPGA DC Virtex-5 FPGA User Guide and AC characteristics are specified for both commercial Virtex-5 FPGA Configuration Guide and industrial grades. Except the operating temperature Virtex-5 FPGA XtremeDSP Design Considerations range or unless otherwise noted, all the DC and AC Virtex-5 FPGA Packaging and Pinout Specification electrical parameters are the same for a particular speed Embedded Processor Block in Virtex-5 FPGAs Reference Guide grade (that is, the timing characteristics of a -1 speed grade Virtex-5 FPGA RocketIO GTP Transceiver User Guide industrial device are the same as for a -1 speed grade Virtex-5 FPGA RocketIO GTX Transceiver User Guide commercial device). However, only selected speed grades Virtex-5 FPGA Embedded Tri-Mode Ethernet MAC User and/or devices might be available in the industrial range. Guide All supply voltage and junction temperature specifications Virtex-5 FPGA Integrated Endpoint Block User Guide for are representative of worst-case conditions. The PCI Express Designs parameters included are common to popular designs and Virtex-5 FPGA System Monitor User Guide typical applications. Virtex-5 FPGA PCB Designers Guide This Virtex-5 FPGA data sheet, part of an overall set of All specifications are subject to change without notice. documentation on the Virtex-5 family of FPGAs, is available on the Xilinx website: Virtex-5 FPGA DC Characteristics Table 1: Absolute Maximum Ratings Symbol Description Units V Internal supply voltage relative to GND 0.5 to 1.1 V CCINT V Auxiliary supply voltage relative to GND 0.5 to 3.0 V CCAUX V Output drivers supply voltage relative to GND 0.5 to 3.75 V CCO V Key memory battery backup supply 0.5 to 4.05 V BATT V Input reference voltage 0.5 to 3.75 V REF (4) 3.3V I/O input voltage relative to GND (user and dedicated I/Os) 0.75 to 4.05 V 0.95 to 4.4 (Commercial Temperature) (3) (5) V 3.3V I/O input voltage relative to GND (restricted to maximum of 100 user I/Os) V IN 0.85 to 4.3 (Industrial Temperature) 2.5V or below I/O input voltage relative to GND (user and dedicated I/Os) 0.75 to V + 0.5 V CCO Current applied to an I/O pin, powered or unpowered 100 mA I IN Total current applied to all I/O pins, powered or unpowered 100 mA (4) Voltage applied to 3-state 3.3V output (user and dedicated I/Os) 0.75 to 4.05 V V TS Voltage applied to 3-state 2.5V or below output (user and dedicated I/Os) 0.75 to V + 0.5 V CCO T Storage temperature (ambient) 65 to 150 C STG (2) T Maximum soldering temperature C +220 SOL (2) T Maximum junction temperature +125 C J Notes: 1. Stresses beyond those listed under Absolute Maximum Ratings might cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those listed under Operating Conditions is not implied. Exposure to Absolute Maximum Ratings conditions for extended periods of time might affect device reliability. 2. For soldering guidelines, refer to UG112: Device Package User Guide. For thermal considerations, refer to UG195: Virtex-5 FPGA Packaging and Pinout Specification on the Xilinx website. 3. 3.3V I/O absolute maximum limit applied to DC and AC signals. 4. For 3.3V I/O operation, refer to UG190: Virtex-5 FPGA User Guide, Chapter 6, 3.3V I/O Design Guidelines. 5. For more flexibility in specific designs, a maximum of 100 user I/Os can be stressed beyond the normal specification for no more than 20% of a data period. 20062010, 2014, 2016 Xilinx, Inc. Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Virtex, Vivado, Zynq, and other designated brands included herein are trademarks of Xilinx in the United States and other countries. PowerPC is a trademark of IBM Corp. and is used under license. PCI, PCI Express, PCIe, and PCI-X are trademarks of PCI-SIG. All other trademarks are the property of their respective owners. DS202 (v5.5) June 17, 2016 www.xilinx.com Send Feedback Product Specification 1Virtex-5 FPGA Data Sheet: DC and Switching Characteristics Table 2: Recommended Operating Conditions Symbol Description Temperature Range Min Max Units Internal supply voltage relative to GND, T =0C to +85C Commercial 0.95 1.05 V J V CCINT Internal supply voltage relative to GND, T =40C to +100C Industrial 0.95 1.05 V J Auxiliary supply voltage relative to GND, T =0C to +85C Commercial 2.375 2.625 V J (1) V CCAUX Auxiliary supply voltage relative to GND, T = 40C to +100C Industrial 2.375 2.625 V J Supply voltage relative to GND, T =0C to +85C Commercial 1.14 3.45 V J (2,4,5) V CCO Supply voltage relative to GND, T =40C to +100C Industrial 1.14 3.45 V J 3.3V supply voltage relative to GND, T =0C to +85C Commercial GND 0.20 3.45 V J 3.3V supply voltage relative to GND, T = 40C to +100C Industrial GND 0.20 3.45 V J 2.5V and below supply voltage relative to GND, Commercial GND 0.20 V + 0.2 V V CCO IN T =0C to +85C J 2.5V and below supply voltage relative to GND, Industrial GND 0.20 V + 0.2 V CCO T = 40C to +100C J Maximum current through any pin in a powered or unpowered Commercial 10 mA (6) I IN bank when forward biasing the clamp diode Industrial 10 mA Battery voltage relative to GND, T =0C to +85C Commercial 1.0 3.6 V J (3) V BATT Battery voltage relative to GND, T = 40C to +100C Industrial 1.0 3.6 V J Notes: 1. Recommended maximum voltage drop for V is 10 mV/ms. CCAUX 2. Configuration data is retained even if V drops to 0V. CCO 3. V is required only when using bitstream encryption. If battery is not used, connect V to either ground or V . BATT BATT CCAUX 4. Includes V of 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. CCO 5. The configuration supply voltage V is also known as V . CC CONFIG CCO 0 6. A total of 100 mA per bank should not be exceeded. Table 3: DC Characteristics Over Recommended Operating Conditions Symbol Description Data Rate Min Typ Max Units V Data retention V voltage (below which configuration data might be lost) 0.75 V DRINT CCINT V Data retention V voltage (below which configuration data might be lost) 2.0 V DRI CCAUX I V leakage current per pin 10 A REF REF I Input or output leakage current per pin (sample-tested) 10 A L C Input capacitance (sample-tested) 8pF IN Pad pull-up (when selected) V =0V, V =3.3V 20 150 A IN CCO Pad pull-up (when selected) V =0V, V =2.5V 10 90 A IN CCO (1) I Pad pull-up (when selected) V =0V, V = 1.8V 5 45 A RPU IN CCO Pad pull-up (when selected) V =0V, V = 1.5V 3 30 A IN CCO Pad pull-up (when selected) V =0V, V = 1.2V 2 15 A IN CCO (1) I Pad pull-down (when selected) V=2.5V 5110A RPD IN (2) I Battery supply current 150 nA BATT n Temperature diode ideality factor 1.0002 n r Series resistance 5.0 Notes: 1. Typical values are specified at nominal voltage, 25C. 2. Maximum value specified for worst case process at 25C. DS202 (v5.5) June 17, 2016 www.xilinx.com Send Feedback Product Specification 2