AC-DC Power Supplies ACM36 Series 36 Watt Energy Efficiency Level VI xxx Series European CoC Tier 2 Medical and ITE Approvals Interchangeable Mains Connectors Optional White Versions Output Voltages from 9 V to 36 V Class II Construction 3 Years Warranty Dimensions: The ACM36 series of wall plug adaptors comply with the latest energy efficiency level VI standards ACM (body only): with high active mode efficiency and extremely low no load power consumption. Available with a 3.81 x 1.3 x 2.34 (96.7 x 33.0 x 59.5 mm) standard jack plug connector these adaptors suit a wide variety of cost sensitive industrial and medical applications while maintaining industry leading performance. Models & Ratings (3) (4) (1,2,5) Output Power Output Voltage Output Current Total Regulation Efficiency Model Number 9.0 V 4000 mA 5% 88.6% ACM36US09 12.0 V 3000 mA 5% 88.6% ACM36US12 15.0 V 2400 mA 5% 88.4% ACM36US15 18.0 V 2000 mA 5% 89.5% ACM36US18 36 W 24.0 V 1500 mA 5% 88.8% ACM36US24 30.0 V 1200 mA 5% 89.3% ACM36US30 36.0 V 1000 mA 5% 89.1% ACM36US36 Notes 1. Model number is for body only. AC input plugs must be ordered separately, see 4. Typical average value measured at 25%, 50%, 75% and 100% at 230 VAC. AC input plug section. 5. For white case version add suffix -W e.g. ACM36US12-W. MOQ applies, 2. Other output voltages available, contact sales for details. contact sales for details. 3. Total regulation includes initial set accuracy, line and load regulation. Input Characteristic Minimum Typical Maximum Units Notes & Conditions Input Voltage 90 264 VAC Input Frequency 47 63 Hz Input Current 0.5 A 230 VAC Inrush Current 70 A 240 VAC, cold start at 25 C Power Factor EN61000-3-2, class A No Load Input Power 75 mW Input Protection Internal fuse in line Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 9 36 V See Models and Ratings table Minimum Load 0 A No minimum load required Start Up Delay 4 s Start Up Rise Time 30 ms Hold Up Time 10 ms Full load and 100 VAC Total Regulation 5 % See Models and Ratings table Recovery within <1% within 500 s for a 60% step load Transient Response 4 % deviation change at 0.15 A/s Measured with 20 MHz bandwidth and 10 F electrolytic in Ripple & Noise 150 mV pk-pk parallel with 0.1 F ceramic capacitor Short Circuit Protection Continuous, trip and restart (hiccup mode) with auto recovery Temperature Coefficient 0.05 %/ C www.xppower.com 1AC-DC Power Supplies ACM36 Series General Characteristic Minimum Typical Maximum Units Notes & Conditions Typical average of efficiencies measured at 25%, 50%, Efficiency 88 % 75% and 100% load and 115 VAC input Energy Efficiency Level VI Isolation 4000 VAC Input to Output, 2 x MOPP Leakage Current 50 A At 264 VAC, 60 Hz, from output to ground Switching Frequency 24 70 Variable kHz Mean Time Between Failure 200 kHrs MIL-HDBK-217F at 25 C GB Weight 0.49 (220) lb (g) Body only Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Derate from 100% load at 40 C to 50% load at 60 C. Operating Temperature 0 +60 C Agency approval to 40 C max. Storage Temperature -20 +85 C Operating Humidity 5 90 % RH, non-condensing Operating Altitude 5000 m Cooling Natural convection Shock 1 m drop onto concrete on each of 6 axes, non operating Vibration 10 300 Hz 2 g, 0.3 decades/min, 15 mins for each of 3 axes EMC: Emissions Phenomenon Standard Test Level Notes & Conditions Conducted EN55032 Level B Radiated EN55032 Level B Harmonic Current EN61000-3-2 Class A Voltage Flicker EN61000-3-3 EMC: Immunity Phenomenon Standard Test Level Criteria Notes & Conditions Medical Device EMC IEC60601-1-2 Ed.4.0 : 2014 as below Low Voltage PSU EMC EN61204-3 High severity level as below ESD Immunity EN61000-4-2 8 kV contact, 15 kV air A Radiated Immunity EN61000-4-3 10 V/m A EFT/Burst EN61000-4-4 Level 3 A Surge EN61000-4-5 Level 2 A Conducted Immunity EN61000-4-6 6 V A Magnetic Fields EN61000-4-8 30 A/m A Int: 100% 10 ms B Dip: 30% 500 ms A/B High Line/Low Line EN61000-4-11 Int: 100% 5000 ms B Dip: 30% 25 AC Cycles A/B High Line/Low Line Dips and Interruptions Int: 100% 0.5 AC Cycle B At 8 angles EN60601-1-2 Int: 100% 1 AC Cycle B Int.: >95% 5000 ms B www.xppower.com 2