DRC100US48 XP Power

AC-DC Power Supplies DRC100 Series 100 Watts Compact lightweight design 10x0Wx coxnve ctSione coroleides UL62368-1 and EN62368-1 approvals Class B conducted & radiated emissions Universal AC input range 85 to 264VAC Output voltages from 12V to 48V DC High efficiency DC output LED indicator -30C to +70C operating temperature 300VAC Input surge withstand Dimensions: MTBF = 300kHrs (MIL-HDBK-217F, +25C GB) DRC100: 3.6 x 2.76 x 2.28 (92.6 x 70.0 x 58.0 mm) 3 year warranty The DRC range of compact lightweight DIN rail mount power supplies is a convenient and cost effective power conversion solution for many industrial and commercial applications. With international safety certification, an industrial temperature range and class B emission compliance, the DRC series also features a DC on LED, wide output voltage adjustment range and alternative DC input range. Models & Ratings Output Voltage Ripple & Noise Maximum (2) Output Voltage Output Power Output Current Typical Efficiency Model Number (2) Range pk-pk Capacitive Load 12V 90W 10.8 - 13.8V 7.5A 120mV 88% 10000F DRC100US12 15V 97W 13.5 - 18.0V 6.5A 120mV 89% 6400F DRC100US15 24V 100W 21.6 - 29.0V 4.2A 150mV 90% 2500F DRC100US24 48V 100W 43.2 - 55.2V 2.1A 240mV 90% 1000F DRC100US48 Notes 1. Output power rating must not be exceeded. 2. Efficiency measured at 230V AC full load. Mechanical Details 2.283 (58.00) 2.57 (70.00) 0.197 (5.00) Dc on Output voltage -Vo +Vo adjustment DRC100 xppower.com 0.394 (10.00) AC(N) AC(L) Notes 1. All dimensions in inches (mm) 4. Screw terminal wire gauge: 12-24AWG 2. Weight: 0.518 lbs (235 g) 5. Connection screw maximum torque: 4.0 lbs-in (0.4 Nm) 3. Tolerance: 0.039 in (1.0 mm) 6. Mounting rail type TS35 www.xppower.com 1 3.648 (92.66) 3.543 (90.00)AC-DC Power Supplies DRC100 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions (1) Input Voltage - Operating 85 264 VAC See input voltage derating curve. Alternatively 120-370VDC Input Frequency 47 50/60 63 Hz Input Current - Full Load 3.0 / 1.6 A 115/230 VAC Inrush Current 35/70 A At 115/230 VAC Earth Leakage Current 0.5 mA rms At 264 VAC, 60 Hz Input Protection Internal fuse fitted No Load Input Power 0.35/0.4 W Models below 48V output / 48V model output Input Surge 300 VAC 5 seconds Surge Withstand 300 Note 1. DC input voltage was not assessed as part of the safety certification process. Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 12 55.2 VDC See Models and Ratings table Initial Set Accuracy 2 % Output Voltage Adjustment See Models and Ratings table, output power rating must not be exceeded Minimum Load 0A No minimum load required Capacitive Load F See Models & Ratings table Start Up Delay 3s Rise time 4ms Hold Up Time 30 ms At full load and 115 VAC/230 VAC Line Regulation 0.5 % Load Regulation 1.5 % Max deviation recovering to within 2% in 2ms for Transient Response 4% a 50% load change. Measured at 20 MHz bandwidth. S ee Models & Ratings Ripple & Noise mV pk-pk table 20 DRC100US12 25 DRC100US15 Overvoltage Protection V 35 DRC100US24 60 DRC100US48 Overload Protection 110 200 % Auto recovery Short Circuit Protection Trip and Restart (Hiccup Mode) Temperature Coefficient 0.02 %/C General Characteristic Minimum Typical Maximum Units Notes & Conditions Isolation: Input to Output 4000 VAC 65 Switching Frequency kHz Output LED Green LED to indicate output on Mean Time Between Failure 300 kHrs MIL-HDK-217F 25C Case Material Black plastic UL94V-0 rated Weight 0.518 (235) lb (g) Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -30 +70 C See thermal derating curve Storage Temperature -40 +85 C Cooling Natural convection Operating Humidity 95 %RH Non-condensing Operating Altitude 2000 m Vibration and Shock Tested to GB/T2423.10-2008 and GB-T2423.22-2002 www.xppower.com 2