DRC30US12 XP Power

M ch nic D t i AC-DC Power Supplies DRC30 Series 30 Watts Compact lightweight design UL62368-1 and EN62368-1 approvals xxx Series Class B conducted & radiated emissions Universal AC input range 85 to 264VAC Output voltages from 5V to 48V DC High efficiency DC output LED indicator -30C to +70C operating temperature 300VAC Input surge withstand MTBF = 300kHrs (MIL-HDBK-217F, +25C GB) Dimensions: 3 year warranty DRC30: 3.6 x 1.38 x 2.28 (92.6 x 35.0 x 58.0 mm) The DRC range of compact lightweight DIN rail mount power supplies is a convenient and cost effective power conversion solution for many industrial and commercial applications. With international safety certification, an industrial temperature range and class B emission compliance, the DRC series also features a DC on LED, wide output voltage adjustment range and alternative DC input range. Models & Ratings Ripple & Noise Maximum (1) (2) Output Voltage Output Power Output Voltage Range Output Current Typical Efficiency Model Number pk-pk Capacitive Load 5V 15W 4.9 - 5.5V 3.0A 80mV 82% 12000F DRC30US05 12V 24W 10.8 - 13.8V 2.0A 120mV 88% 6000F DRC30US12 15V 30W 13.5 - 18.0V 2.0A 120mV 89% 5000F DRC30US15 24V 36W 21.6 - 29.0V 1.5A 150mV 89% 1400F DRC30US24 48V 36W 43.2 - 55.2V 0.75A 240mV 90% 600F DRC30US48 Notes 1. Output power rating must not be exceeded. 2. Efficiency measured at 230V AC full load. e a al e a ls 2.283 (58.00) 2.047 (52.00) +Vo 0.197 (5.00) Output voltage -Vo adjustment DC on LED DRC30 xppower.com 0.394 (10.00) AC(N) AC(L) Notes 1. All dimensions in inches (mm) 4. Screw terminal wire gauge: 12-24AWG 2. Weight: 0.253 lbs (115 g) 5. Connection screw maximum torque: 4.0 lbs-in (0.4 Nm) 3. Tolerance: 0.039 in (1.0 mm) 6. Mounting rail type TS35 www.xppower.com 1 3.648 (92.66) 3.543 (90.00)AC-DC Power Supplies DRC30 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions (1) Input Voltage - Operating 85 264 VAC See input voltage derating curve. Alternatively 120-370VDC Input Frequency 47 50/60 63 Hz Input Current - Full Load 0.9/0.5 A 115/230 VAC Inrush Current 25/45 A At 115/230 VAC Earth Leakage Current 0.25 mA rms At 264 VAC, 60 Hz No Load Input Power 0.3/0.4 W Models below 48V output / 48V model Input Protection Internal fuse fitted Surge Withstand 300 VAC 5s Note 1. DC input voltage was not assessed as part of the safety certification process. Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 4.9 55.2 VDC See Models and Ratings table Initial Set Accuracy 2 % Output Voltage Adjustment See Models and Ratings table, output power rating must not be exceeded Minimum Load 0 A No minimum load required Capacitive Load F See Models & Ratings table Start Up Delay 3 s Rise time 4ms Hold Up Time 12/60 ms At full load and 115 VAC/230 VAC Line Regulation 0.5 % Load Regulation 1.5 % Max deviation recovering to within 2% in 2ms for Transient Response 4 % a 50% load change. Measured at 20 MHz bandwidth. S ee Models & Ratings Ripple & Noise mV pk-pk table 7.5 DRC30US05 16 DRC30US12 Overvoltage Protection V 20 DRC30US15 36 DRC30US24 60 DRC30US48 rlo rot tio to r o r Ove ad P ec n 120 % Au ec ve y Short Circuit Protection Trip and Restart (Hiccup Mode) Temperature Coefficient 0.02 %/C General Characteristic Minimum Typical Maximum Units Notes & Conditions Isolation: Input to Output 4000 VAC 65 Switching Frequency kHz Output LED Green LED to indicate output on Mean Time Between Failure 300 kHrs MIL-HDK-217F 25C Case Material Black plastic UL94V-0 rated Weight 0.253 (115) lb (g) Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -30 +70 C See thermal derating curve Storage Temperature -40 +85 C Cooling Natural convection Operating Humidity 95 %RH Non-condensing Operating Altitude 2000 m Vibration and Shock Tested to GB/T2423.10-2008 and GB-T2423.22-2002 www.xppower.com 2