5/10 Watts xppower.com ECE Series Ultra Compact Size Single Outputs from 3.3 to 48 V Encapsulated PCB Mount <0.3 W No Load Input Power Peak Load Capability No External Components Required 3 Year Warranty Specification Input General Input Voltage 85-264 VAC (120-370 VDC) derate load Efficiency See tables from 100% at 90 VAC to 90% at 85 VAC Isolation 4000 VAC Input to Output Input Frequency 47-63 Hz Switching Frequency 130 kHz typical 3 Input Current ECE05: 0.1 A rms at 230 VAC Power Density ECE05: 8.3 W/In 3 ECE10: 0.2 A rms at 230 VAC ECE10: 11.1 W/In Inrush Current ECE05: 5 A at 115 VAC, 10 A at 230 VAC, MTBF >450 kHrs to MIL-HDBK-217F at 25 C, GB ECE10: 10 A at 115 VAC, 20 A at 230 VAC cold start at 25 C Environmental Power Factor EN61000-3-2 Class A Operating Temperature -25 C to +70 C, derate linearly from Earth Leakage Current Class II construction no earth 100% at +50 C to 50% at +70 C No Load Input Power <0.3 W Cooling Convection-cooled Input Protection Internal T1 A/250 VAC fuse Operating Humidity 95% RH, non-condensing Storage Temperature -40 C to +85 C Output Operating Altitude 3048 m, 10,000 ft Output Voltage See tables Vibration 2 g, 10 Hz to 500 Hz, 10 mins/cycle, 60 mins each of 3 axes. Initial Set Accuracy 1% Minimum Load No minimum load required EMC & Safety Start Up Delay 2 s max Start Up Rise Time 25 ms max Emissions EN55032, level B conducted & radiated* Hold Up Time 8 ms/40 ms typical at full load and Harmonic Currents EN61000-3-2, EN61000-3-3 115/230 VAC ESD Immunity EN61000-4-2, level 3 Perf Criteria A Line Regulation 0.5% max Radiated Immunity EN61000-4-3, 10 V/m 80% mod Load Regulation 1% max Perf Criteria A Transient Response 4% max deviation, recovery to within EFT/Burst EN61000-4-4, level 3 Perf Criteria A 1% in 500 s for a 25% load change Surge EN61000-4-5, installation Class 3, Ripple & Noise 3.3-5 V versions: 60 mV pk-pk, all other Perf Criteria A models 1% pk-pk max 20 MHz bandwidth Conducted Immunity EN61000-4-6, 10 Vrms Perf Criteria A Overvoltage Protection 125-190%, 195-216% ECE10US03 Magnetic Fields EN61000-4-8, 10 A/m Perf Criteria A Overload Protection 125-190% Dips & Interruptions EN61000-4-11, 30% for 10 ms, Short Circuit Protection Trip and restart (hiccup mode) 60% for 100 ms, 100% for 5000 ms Temperature 0.05%/C Perf Criteria A, B, B Coefficient Safety Approvals IEC60950-1:2005 Ed 2 / IEC62368-1:2014 UL 62368-1 & CAN/CSA C22.2 No. 62368- 1-14, EN62368-1:2014/A11:2017 Notes * If output is connected to GND, please contact applications engineering for further information. AC-DCAC-DC ECE5/10 Models and Ratings Output Current (3) (2) Output Power Output V oltage Efficiency Model Number (1) Nominal Peak 5.0 W 3.3 VDC 1.51 A 1.81 A 74% ECE05US03 5.0 W 5.0 VDC 1.00 A 1.20 A 80% ECE05US05 5.0 W 9.0 VDC 0.55 A 0.66 A 82% ECE05US09 5.0 W 12.0 VDC 0.41 A 0.49 A 82% ECE05US12 5.0 W 15.0 VDC 0.33 A 0.40 A 84% ECE05US15 5.0 W 24.0 VDC 0.21 A 0.25 A 83% ECE05US24 5.0 W 48.0 VDC 0.10 A 0.12 A 85% ECE05US48 8.6 W 3.3 VDC 2.60 A 3.12 A 77% ECE10US03 10.0 W 5.0 VDC 2.00 A 2.40 A 80% ECE10US05 10.0 W 9.0 VDC 1.11 A 1.33 A 82% ECE10US09 10.0 W 12.0 VDC 0.83 A 1.00 A 83% ECE10US12 10.0 W 15.0 VDC 0.66 A 0.79 A 82% ECE10US15 10.0 W 24.0 VDC 0.41 A 0.49 A 83% ECE10US24 10.0 W 48.0 VDC 0.21 A 0.25 A 83% ECE10US48 Notes 1. Peak load lasting <30 s with a maximum duty cycle of 10%, average output 3. Efficiencies measured at 100% load with 115 VAC input. power not to exceed nominal power. 2. Add suffix-P to model number to denote open frame version. Available for OEM quantities. Mechanical Details 1.00 (25.4) ECE05 ECE10 0.75 (19.05) 0.6 (15.24) 0.10 (2.54) 1.00 (25.4) 0.60 (15.24) 00.817 (20.76) 2 1 0.10 0.2 (2.7) (5.08) 3 Bottom 1.5 See pin View (38.1) 1.00 Diameter (25.4) Note 3 1.3 0.85 (33.02) 4 0.15 (21.59) (3.9) 0.40 2 (10.16) 0.2 (5.08) 1 3 4 5 0.04 (1.0) 0.123 (3.13) 0.10 (2.54) 0.072 (1.84) See note. 4 0.1 0.50 (12.7) (2.54) ECE05-P ECE10-P 0.94 (23.9)0 1.4 (35.56) 0.07 (1.95) 0.817 (20.76) 1.3 (33.02) 0.065 0.065 (1.65) (1.65) 5 1 2 3 2 0.15 0.50 (3.9) (12.7) 0.940 0.85 4 0.93 (23.9) (21.59) (23.7) 0.45 0.75 0.84 (11.43) 4 (19.05) (21.5) 0.05 (1.27) 3 1 0.47 0.469 0.059 (12.0) (11.9) (1.5) 0.61 max max max (15.5) Pin Function 0.04 (1.0) 1 ACN Pin Function 2 ACL 1 ACN 0.03 3 NC 2 ACL (0.8) 4 -Vout 3 -Vout 0.173 0.04 (4.4) (1.0) 5 +Vout 0.07 (1.8) 4 +Vout See note. 4 0.15 0.04 (1.0) (3.8) Notes 1. All dimensions in inches (mm). 3. Pin 1, 2 Size is 0.024 (0.6mm) DIA 0.002 (0.05mm) 2. Weight: ECE05: 0.035 lbs (16 g) ECE10: 0.053 lbs (24 g) Pin 3, 4, 5 Size is 0.02 (0.5mm) DIA 0.002 (0.05mm) ECE05-P: 0.022 lbs (10 g) ECE10-P: 0.031 lbs (14 g) Tolerances: x.xx = 0.02 (x.x = 0.5), x.xxx = 0.01 (x.xx = 0.25) 4. ECE05: The solder pads for pins 1 & 2 should have a maximum diameter of 1.3mm to ensure that the creepage requirements of IEC60950 are met. 18 Feb 20