FDMM01SFR XP Power

EMI Filter XPPower FDMM IEC Power Inlet with Line Filter IEC320-C14 Filtered Inlet xxx Series Dual Fuse Screw Mount Compact Design Medical Application 1, 3, 6 & 10A Rating 6.3 x 0.8mm Faston Terminals Bleed Resistor Shielded Metal Body Wide Operating Temperature Range 3 Year Warranty The FDMM has an IEC320-C14 inlet with a front accessible (when the mains connector is disconnected) dual fuse holder, combined with a low earth leakage medical IEC inlet filter in a compact single housing. It is suitable for mains powered medical equipment where dual fusing and low earth leakage current is required. Providing excellent attenuation to conducted electro-magnetic interference from the mains supply, whilst reducing any conducted emissions from within the equipment onto the mains supply. Suitable for class I appliances, all models feature a shielded metal body, and are fitted with a bleed resistor to safely discharge the filter capacitors when power is disconnected. Safety approvals are EN60939-2 for passive filters & ANSI/UL1283 for EMI filters. They feature a wide operating temperature range of -40C to +110C with full power operation up to +50C. Specifications Characteristics Minimum Typical Maximum Units Notes and Conditions Rated Voltage 250 VAC Input Frequency DC 400 Hz Rated Current 1 10 A See models and ratings table Earth Leakage Current 2 5 A See models and ratings table MTBF 1.35 MHrs MIL-HBDK 217F, 250 VAC at 40C Flammability Rating UL94V-2 Temperature Operating -40 110 C See derating curve EN60939-2 Passive filter units for EMI suppression Safety Approvals ANSI/UL1283 Electromagnetic Interference Filters Terminals Faston 6.3 x 0.8mm straight Protection Class Suitable for appliances with protection Class I Dielectric Strength 1500 VAC Electrical Schematic F L L R Cx L F N N PE PE Note: Fuses not supplied www.xppower.com 1EMI Filter XPPower FDMM Models & Ratings Leakage current Inductance Capacitance Rated Resistance Weight Application Mounting Filter current 115VAC/60Hz 250VAC/50Hz 10kHz, 0.25V Cx Cy 1A 2 A 5 A 2 x 6.5mH 0.1 F None 1M 55g Medical Screw FDMM01SFR 3A 2 A 5 A 2 x 2.5mH 0.1 F None 1M 55g Medical Screw FDMM03SFR 6A 2 A 5 A 2 x 0.8mH 0.1 F None 1M 53g Medical Screw FDMM06SFR 10A 2 A 5 A 2 x 0.2mH 0.1 F None 1M 56g Medical Screw FDMM10SFR Thermal Derating 100 80 60 40 20 0 -40 -20 0 20 40 60 80 100 120 Ambient Temperature (C) Mechanical Details Suggested Panel Cutout (Mounting from front) 1.70 1.22 (43.4) 2 x 0.14 LN 1.29 (31.0) (3.6) Min. (33.0) Top View PE 1.33 Use only with a 250V fuse 2.44 (34.0) GB20213746.5 CN568462 PAT. (62.0) TWM215052US7019612B2 Max. 1.11 (28.3) 1.12 (28.5) 2 x 0.12 4 x R3 Max. (3.2) 1.41 (36.0) 1.41 (36.0) N PE L 1.73 (44.0) 1.28 (32.6) 1.12 (28.5) Output Terminals: 6.3 mm x 0.8 mm Fast-ons Fuse is not supplied. Correct fuse dimensions are 5mm x 20mm www.xppower.com 2 Current (%)