n PBP - 01 BISTABLE RELAY INSTRUCTION MANUAL Zakad Mechaniki i Elektroniki ZAMEL sp.j. J.W. Dzida, K. odziska ul. Zielona 27, 43-200 Pszczyna, Poland Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04 www.zamelcet.com, e-mail: marketing zamel.pl DESCRIPTION TECHNICAL DATA PBP - 01 The PBP-01 bistable relay is designed for lighting or any other unit by means Power terminals: L (black), brown in series with the load of single pole push buttons connected in Rated voltage: 230 V parallel. Successive pressing of any but- Rated voltage tolerance: -15 +10 % ton causes switching ON / OFF the load Rated frequency: 50 Hz connected to the output terminals alterna- Rated current: 8 mA tively. The L line must be a source of the Load supply indicator: red LED control impulse. The device is designed Trigger conductor: IN (red) for mounting in the deep 60 mm junction Trigger circuit control current: 220 A box. Permissible load: 30 300 W Fuse technical specification: 5 x 20 mm, ultra-fast, 2 A / 250 V Control: triac FEATURES Connection wires quantity: 3 2 Connection wire section: 1 mm Bistable lighting control, o Operating temperature: -20 +45 C Soft start and switch-OFF (0.8 s), Operating position: optional Load ON indicator - red LED, Casing fastening: Device triggering by means of the L for 60 mm junction box Casing IP: wire, IP40 Applicable together with the single Protection class: II pole push buttons, illuminated, Overvoltage category: II Two-conductor control system, Pollution level: 2 350 W output, Dimensions: 50 x 50 x 15 mm Easy applicable together with any Weight: 28 g existing electrical system. Standard conformity: PN-EN 60669-1, PN-EN 60669-2-1, PN-EN 61000-4-2,3,4,5,6,11 The timer should be APPERANCE connected to a single- phase system accordin- gly to current standards. The device connections CAUTION will be described in this Load ON indicator manual. Only qualified electricians are allowed to assembly, connect and ad- just the timer. It is necessary to read this Load power lead manual before the timer mounting. Do Trigger conductor (IN) not disassembly the timer casing or you Power lead (L) will lose any warranty rights and expo- se yourself to the electric shock hazard. Before mounting operation make sure Fuse socket of disconnecting the connection wires from the electric network. The timer should be carried, stored and used in an appropriate way. Do not mount the timer in case of any device parts lack, damage or deformation. In case of mal- function please notify the manufacturer. k w c o d a r l e b b rn w k o d c r e a b r l b ASSEMBLY, OPERATION CONNECTIONS 1. Disconnect the electric network by means of an appropriate cut-off, current-limiting circuit-breaker or separator. 2. Check if there is no any voltage between power leads by means of an appropriate gauge. 3. Mount the PBP-01 module in the 60 mm junction box. 4. Connect wires according to the electrical diagram. 5. Connect power supply circuit. The unit is designed for lighting con- trol of up to 350 W. A single pole push button is used for lighting control. If nee- ded, it is possible to connect the push buttons in parallel and control the lights from various places. The push button APPLICATION pressing causes the light switching ON / OFF alternatively. When the light bulbs are OFF, pressing the push button cau- ses soft switching ON the light (0.8 s). The soft start elongates the bulbs life. The ligh is OFF softly, too (0.8 s). CASING DIMENSIONS Typical assembly exam- ple with the PBP-01 bi- stable relay. A single pole bell-push is applied in the unit. TIME DIAGRAMS PRODUCT FAMILY The PBP-01 bistable relay is a member of the PBX product family. UNIT DIAGRAM 24 V AC/DC supply version available for PMB-01, PMB-02, PMB-03 Device version: 01 basic 02 extended: SET, RESET functions and state storage 03 with time limit function LOAD Casing type: M single-module P for junction box Device type WARRANTY The product warranty is for a period of 24 months 1. ZMIE ZAMEL SP. J. assures 24 months guarantee for the product. 2. The manufacturers guarantee does not cover any of the following actions: a) mechanical damage during transport, loading / unloading or under other circumstances, b) damage caused by incorrect product mounting or misuse, c) damage caused by unauthorised modifications made by the PURCHASER or any third parties to the product or any other devices needed for the product functioning, d) damage caused by Act of God or any other incidents independent of the manufacturer. 3. The PURCHASER shall lay any claims in writing to the dealer or ZMIE ZAMEL SP. J. 4. ZMIE ZAMEL SP. J. is liable for processing any claim according to current Polish legislation. 5. ZMIE ZAMEL SP. J. shall process the claim at its own discretion: product repair, replacement or money return. 6. The manufacturers guarantee is valid in the Republic of Poland. 7. The PURCHASERs statutory rights in any applicable legislation whether against the retailer arising from the purchase contract or otherwise are not affected by this warranty. Dealer signature & stamp, purchase date n k w c o d a r e l b b r C