Wireless universal transmitter RF I/O SW915-4E Material number: 1432305 Features/Options No wiring and pipe laying required Thermoplastic enclosure Power supply by Lithium battery sWave wireless technology Easy programming of receiver Output signal can be individually configurated at the receiver Note The RF I/O may be used in combination with an wireless inductive sensor RF IS Connection of external switching contact (potentialfree contact) with gold contacts possible. Delivery does not include protective caps. Dimensions Technical Data Standards EN 60947-5-1 EN 61000-6-2, -6-3, EN 61000-4-2, -4-20 EN 301 489-1 EN 301 489-3 EN 300 220-1 EN 300 220-2 Enclosure ABS (Acrylnitril-Butadien-Styrol) Connection 4 x Plug-in connector M12 x 1 4-pole Degree of protection IP 67 to IEC/EN 60529 Wireless protocol sWave Ambient temperature 20 C +65 C Operation cycles approx. 12000 telegrams at repetitions/h Switching frequency max. 5 Hz Standby current 60 A Voltage supply Lithium battery Tadiran SL-760 (Europe) TL-5903 (North America) system Li/SOCl2 (replaceable) Nominal voltage 3.6 V Capacity 2.2 Ah Frequency 915 MHz (USA, Canada and Australia) Transmission power < 10 mW Data rate 66 kbps Channel bandwidth 400 kHz Sensing range max. 450 m outside, max. 40 m inside Battery life depending on the switching frequency and number and type of sensors for 1000 transfers/day and one inductive sensor approx. 300 days for 1000 transfers/day and one mechanical switch approx. 1400 days Actuating time min. 80 ms Approvals USA: FCC: XK5-RFRXSW915 Pin-assignment Canada: IC: 5158A-RFRXSW915 Note Transmission of battery voltage status signal: individually adjustable via jumper, no, 10 s, 100 s, 1000 s, 10 000 s Colour coding only valid for Coupling 4-poles mat. no. 1215497 and Errors and omissions excepted. Coupling 4-poles mat. no. 1262873 Created: 25.11.2016 Pe Status: Revision: - page steute Schaltgerte Brckenstrae 91 phone +49 (0) 5731 745-0 info steute.com 1 / 2 GmbH & Co. KG 32584 Lhne, Deutschland fax +49 (0) 5731 745-200 www.steute.com Wireless universal transmitter RF I/O SW915-4E Material number: 1432305 Features/Options No wiring and pipe laying required Thermoplastic enclosure Power supply by Lithium battery sWave wireless technology Easy programming of receiver Output signal can be individually configurated at the receiver Note The RF I/O may be used in combination with an wireless inductive sensor RF IS Connection of external switching contact (potentialfree contact) with gold contacts possible. Delivery does not include protective caps. Sensors External switch contact Created: 25.11.2016 Pe Status: Revision: - page steute Schaltgerte Brckenstrae 91 phone +49 (0) 5731 745-0 info steute.com 2 / 2 GmbH & Co. KG 32584 Lhne, Deutschland fax +49 (0) 5731 745-200 www.steute.com