16 3 16 Crosspoint a Switch Array AD75019 FEATURES FUNCTIONAL BLOCK DIAGRAM 256 Switches in a 16 3 16 Array ANALOG Wide Signal Range: to Supply Rails of 24 V or 612 V INPUTS/OUTPUTS X0 X15 V V V DD SS CC DGND Low On-Resistance: 200 V Typ TTL/CMOS/Microprocessor-Compatible Control Lines +12V 12V +5V DGND SERIAL DATA IN Serial Input Simplifies Interface Y0 Serial Output Allows Cascading for More Channels SHIFT LATCH REGISTER Low Power Consumption: 2 mW Quiescent CELL 256 ANALOG SWITCH AD75019 Compact 44-Lead PLCC BUSED CLOCK SERIAL LINES ANALOG DATA OUTPUTS/ TO NEXT INPUTS STAGES SERIAL DATA FROM 16 3 16 ARRAY OF SWITCHES, PRIOR STAGES LATCHES, AND SHIFT REGISTER CELLS (ONLY TWO LOCATIONS BUSED CLOCK ARE SHOWN FOR CLARITY) LINES Y15 SHIFT ANALOG REGISTER LATCH SWITCH CELL 1 PARALLEL SERIAL CLOCK CLOCK PCLK SCLK SOUT PRODUCT DESCRIPTION To extend the number of switches in the array, you may cascade The AD75019 contains 256 analog switches in a 16 16 array. multiple AD75019s. The SOUT output is the end of the shift Any of the X or Y pins may serve as an input or output. Any or register, and may be connected to the SIN input of the next all of the X terminals may be programmed to connect to any or AD75019. all of the Y terminals. The switches can accommodate signals The AD75019 is fabricated in Analog Devices BiMOS II with amplitudes up to the supply rails and have a typical on- process. This epitaxial BiCMOS process features CMOS resistance of 150 W . devices for low distortion switches and bipolar devices for Data is loaded serially via the SIN input and clocked into an on- ESD protection. board 256-bit shift register via SCLK. When all the switch set- tings have been programmed, data is transferred into a set of 256 latches via PCLK. The serial shift register is dynamic, so there is a minimum clock rate of 20 kHz. The maximum clock rate of 5 MHz allows loading times as short as 52 m s. The switch control latches are static and will hold their data as long as power is applied. REV. D Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. use, nor for any infringements of patents or other rights of third parties Tel: 781.329.4700 201 8 Analog Devices, Inc. All rights reserved. which may result from its use. No license is granted by implication or www.analog.com Technical Support otherwise under any patent or patent rights of Analog Devices.1 (T = +258C, V and V = 612 V, V = +5 V unless otherwise noted) AD75019SPECIFICATIONS A DD SS CC AD75019 Symbol Min Typ Max Units MULTIPLEXER Input Signal Range V V 0.5 V + 0.5 V IN SS DD Switch ON Resistance, V and V = 12 V, V = 12 V R 150 300 W DD SS SIGNAL ON Switch ON Resistance, V and V = 5 V, V = 5 V R 300 500 W DD SS SIGNAL ON 2 Switch ON Resistance Matching , V = 12 V D R 20 30 W SIGNAL ON Leakage Current, V = 10 V 2 10 nA SIGNAL Input/Output Capacitance C 25 pF IN Isolation Between Any Two Channels R = 600 W , R = 10 kW , V = 2 V p-p S L SIGNAL f = 1 kHz 92 dB SIGNAL f = 20 kHz 69 dB SIGNAL f = 1 MHz 38 dB SIGNAL Total Harmonic Distortion R = 600 W , R = 10 kW , V = 2 V p-p 0.01 % S L SIGNAL Switch Frequency Response, 3 dB R = 600 W , R = 10 kW , V = 2 V p-p 20 MHz S L SIGNAL Propagation Delay 48 ns DIGITAL INPUTS (SIN, SCLK, PCLK) Logic Levels (TTL Compatible) Input Voltage, Logic 1 V 2.4 5.5 V IH Input Voltage, Logic 0 V 0 0.8 V IL Input Current, V = 5.5 V I 1 m A IH IH Input Current, V = 0.8 V I 1 m A IL IL Input Capacitance C 10 pF IN DIGITAL OUTPUTS (SOUT) Logic Levels (TTL Compatible) Output Voltage, Logic 1 V 2.8 V OH Output Voltage, Logic 0 V 0.4 V OL Output Current, V = 2.8 V I 3.2 mA OH OH Output Current, V = 0.4 V I 3.2 mA OL OL POWER SUPPLY REQUIREMENTS Voltage Range, Total Analog V V 9.0 25.2 V DD SS Voltage Range, Positive Analog V V (V 0.5) 25.2 V DD DGND CC Voltage Range, Negative Analog V V 20.7 0 V SS DGND Voltage Range, Digital V V 4.5 5 5.5 V CC DGND Supply Current, SCLK = 5 MHz, I , I 70 mA DD SS V = 0.8 V, V = 2.4 V I 800 m A IL IH CC Supply Current, Quiescent, I , I 6400 m A DD SS V = 0.8 V, V = 2.4 V I 100 m A IL IH CC NOTES 1 All minimum and maximum specifications are guaranteed, and specifications shown in boldface are tested on all production units at final electrical test. Results from those tests are used to calculate outgoing quality levels. 2 Switch resistance matching is measured with zero volts at each analog input and refers to the difference between the maximum and minimum values. Specifications subject to change without notice. PIN FUNCTION DESCRIPTIONS PIN CONFIGURATION Pin Name Description Pin Name Description 1 PCLK Parallel Clock Input 23 X8 Analog Input (or Output) 2 SCLK Serial Clock Input 24 X9 Analog Input (or Output) 3 SIN Serial Data Input 25 X10 Analog Input (or Output) 6 5 4 3 2 1 44 43 42 41 40 4V Negative Analog Power Supply 26 X11 Analog Input (or Output) SS PIN 1 5 NC No Internal Connection 27 X12 Analog Input (or Output) Y15 7 39 NC IDENTIFIER 6 NC No Internal Connection 28 X13 Analog Input (or Output) Y14 8 38 Y7 7 Y15 Analog Output (or Input) 29 X14 Analog Output (or Input) 9 Y13 37 Y6 8 Y14 Analog Output (or Input) 30 X15 Analog Output (or Input) Y12 10 36 Y5 9 Y13 Analog Output (or Input) 31 Y0 Analog Output (or Input) Y11 11 35 Y4 AD75019 10 Y12 Analog Output (or Input) 32 Y1 Analog Output (or Input) 12 34 Y10 Y3 11 Y11 Analog Output (or Input) TOP VIEW 33 Y2 Analog Output (or Input) 13 (Not to Scale) 33 Y2 Y9 12 Y10 Analog Output (or Input) 34 Y3 Analog Output (or Input) 14 32 Y8 Y1 13 Y9 Analog Output (or Input) 35 Y4 Analog Output (or Input) 31 X0 15 Y0 14 Y8 Analog Output (or Input) 36 Y5 Analog Output (or Input) 30 15 X0 Analog Input (or Output) X1 16 X15 37 Y6 Analog Output (or Input) 16 X1 Analog Input (or Output) 38 Y7 Analog Output (or Input) X2 17 29 X14 17 X2 Analog Input (or Output) 39 NC No Internal Connection 18 X3 Analog Input (or Output) 40 NC No Internal Connection 18 19 20 21 22 23 24 25 26 27 28 19 X4 Analog Input (or Output) 41 V Positive Analog Power Supply DD 20 X5 Analog Input (or Output) 42 V Digital Power Supply CC 21 X6 Analog Input (or Output) 43 DGND Digital Ground NC = NO CONNECT 22 X7 Analog Input (or Output) 44 SOUT Serial Data Output: Positive True REV. D 2 X3 NC X4 NC X5 V SS X6 SIN SCLK X7 X8 PCLK X9 SOUT DGND X10 X11 V CC X12 V DD X13 NC