COMX-P40x0- ENP2 Modules Ruggedized QorIQ Modules Front page The COMX-P40x0-ENP2 modules from Emerson Network Power provide the performance PRELIMINARY DATA SHEET and features of the Freescale QorIQ processors on ready-to-go pluggable mezzanine modules that is suitable for use in extended temperature, rugged environments. By Ruggedized and extended incorporating and leveraging the mechanical features and dimensions of the COM Express temperature COM Express specification, the COMX-P40x0-ENP2 modules exhibit all the best attributes of the COM modules with Freescale Express open standard enabling shorter development schedules and faster time-to-market. Interior page QorIQ processing power Emerson has a range of QorIQ based COM Express form factor modules to enable scalable product strategies with multiple performance levels. Freescale QorIQ P4040 or The COMX-P40x0-ENP2 modules are 95 mm x125 mm which enable them to fit within a P4080 processor at 1.2GHz very wide range of enclosures when mounted on a customer carrier. COMX-P40x0-ENP2 modules are off-the-shelf processor solutions that isolate you from the complexities of high 2 or 4 GB of soldered-down speed processor and memory system design, allowing you to concentrate on your carrier DDR3-1333 ECC memory and application, lowering risk and improving your development schedules. 95 mm x 125 mm COM Express Basic footprint By combining the tried and tested Power Architecture processor cores along with a -40 C to +71 C operating considerable range of on-module I/O, the COMX-P40x0-ENP2 series is suitable for a range of temperature range applications including 4G base-station controllers, in flight entertainment, transport control Shock and vibration hardened and signaling, vehicle instrumentation and other applications that need high performance, low latency control in a rugged package. 16 configurable SERDES lanes available for maximum flexibilityFront page Interior page COMX-P4040 & COMX-P4080 Block Diagram Aurora x2 PCIe x4 / SRIO x 4 Bank 1 8:9 Test Points Bank 1 0:3 PCIe x4 / SRIO x 4 / x4 SGMII Bank 1 4:7 PCIe x4 / x4 SGMII / XAUI Bank 2 10:13 SerDes x4 SGMII / XAUI Bank 3 14:17 Block ULPI USB PHY JTAG/COP Debug Header USB 4x USB Hub ULPI Channel 1 USB 9x DDR3 PHY 1200MT/s Channel 2 9x DDR3 Dual RGMII 10/100/1000B-T 1200MT/s GbE PHY MDIO1 COM Freescale Express QorIQ MDIO2 Connectors P4040/P4080 SDIO 1.2 GHz 4x UART 16x GPIO IEEE 1588 Local Bus (x16) 256MB 1GB Voltage NOR NAND Monitor Flash Flash 3x I2C V BAT Temp RTC & EE-PROM WDT Sensor WDT SPI Reset Tamper Detect 2