COMPUTING COMX-P4040 & COMX-P4080 High Performance NXP QorIQ Modules Data Sheet The COMX-P4040 and COMX-P4080 modules from Artesyn Embedded Technologies COM Express based modules with QorIQ provide the performance and features of the NXP QorIQ processors on ready-to-go processing power for rapid deployment pluggable mezzanine modules. By incorporating and leveraging the mechanical features across diverse I/O requirements and dimensions of the COM Express specification, these modules exhibit all the best attributes of the COM Express open standard enabling shorter development schedules NXP QorIQ P4040 and P4080 and faster time-to-market. Artesyn has a range of QorIQ based COM Express form factor processors modules to enable scalable product strategies with multiple performance levels. This open, Four or eight Power Architecture standardized approach fosters competitive pricing, greater upgrade flexibility and longevity cores running at 1.5 GHz of support. Supports two channels of 2GB DDR3- The QorIQ P4040 and P4080 processors are effectively system-on-chip (SOC) devices 1333 ECC SO-UDIMM (4GB max.) with a range of features including high-performance datapath acceleration and network 95 mm x 125 mm COM Express Basic processing in a low power envelope making the COMX-P4040 and COMX-P4080 modules footprint suitable for combined control, datapath and application layer processing. Underpinning the high-compute capability of these modules are the multiple Power Architecture e500mc 12 configurable SERDES lanes cores which are complemented by highly flexible I/O including 10G-XAUI, SRIO, GPIO, available for maximum flexibility USB 2.0, PCI Express, Gigabit Ethernet and real-time debug. The dimensions of the COMX-P4040 and COMX-P4080 modules are 95 mm x 125 mm which enable them to fit within a very wide range of enclosures when mounted on a customer carrier. They are off-the-shelf processor solutions that isolate you from the complexities of high speed processor and memory system design, allowing you to concentrate on a carrier tailored to application I/O needs. By combining the tried and tested Power Architecture processor cores along with a considerable range of on-module I/O, the COMX-P4040 and COMX-P4080 are suitable for a range of applications including enterprise and service provider routers, switches, base-station controllers, radio network controllers (RNCs), long-term evolution (LTE) and general-purpose embedded computing systems in the networking, telecom/datacom, wireless infrastructure, military and aerospace markets. COMX-P4080 Data Sheet COMX-P4040 & COMX-P4080 Block Diagram Aurora x2 PCIe x4 / SRIO x 4 Test Points Bank 1 8:9 Bank 1 0:3 PCIe x4 / SRIO x 4 / x4 SGMII Bank 1 4:7 PCIe x4 / SRIO x 4 / x4 SGMII / XAUI Bank 2 10:13 SerDes Block USB* USB 4x USB* Hub* JTAG/COP Debug Header USB* USB 4x USB Hub Channel 1 ULPI USB 2GB DDR3 ECC SO-DIMM PHY 1066/1333 Channel 2 RGMII* 10/100/1000B-T* 2GB DDR3 ECC SO-DIMM Dual 1066/1333 GbE RGMII 10/100/1000B-T PHY COM NXP MDIO Express QorIQ MDIO Connectors P4040/P4080 SDIO 4x UART 8x GPIO IEEE 1588 Local Bus 128MB 1GB SPI NOR NAND Flash Flash Flash Socket SPI 3x I2C V BAT Temp RTC & EE-PROM WDT Sensor WDT Reset Tamper Detect *Not supported on COMX-P4040