DS2000SPE-3 Artesyn Embedded Technologies

POWER DS2000SPE Series Data Sheet 2000 Watts Distributed Power System Front-end Bulk Power Total Output Power: 2000 W continuous at high line 90-140 V &180-264 Vac Operation SPECIAL FEATURES 2000 W output power at high line High power and short form factor 1U power supply 3 High density design: 50 W/in Active power factor correction Inrush current control Electrical Specifications 80plus platinum efficiency Input N+1 or N+N redundant Input voltage range 180 to 264 Vac: 2000 W Active current sharing 90 to 140 Vac: 1000 W PMBus compliant Frequency 47 Hz to 63 Hz Two-year warranty Efficiency 94.0% peak Max input current 11.5 Arms at 100/200 Vac COMPLIANCE Inrush current 50 Apk Class A Conducted/Radiated EMI Conducted EMI Class A RoHS Radiated EMI Class A Power factor > 0.9 beginning at 20% load SAFETY ITHD 10% UL/cUL 60950 (UL Recognized) Leakage current 1.0 mA DEMKO+ CB Report EN60950 Hold-up time 11 ms at 95% load EN60950 CE Mark Ordering Information Model Number Nominal Main Output Standby Output Airflow Direction DS2000SPE-3 12.2 V 163.9 A 12 V 3.5 A Standard (forward) TBD 12.2 V TBD 12 V 3.5 A ReverseDS2000SPE Data Sheet Electrical Specifications Output Main DC Output MIN NOM MAX Nominal setting 12.175 12.2 12.225 Total output regulation range 11.4 V 12.9 V Dynamic load regulation range 11.4 V 12.9 V Output ripple 180 mVp-p 1, 2 Output current 5.0 A (minimum starting load for 163.9 A at high line 17% transient step) 82 A at low line Current sharing Within +/-7.0 A of each other Capacitive loading 4,900 F 38,000 F Start-up from AC to output 2,300 ms Output rise time 100 ms Standby DC Output Nominal setting 11.95 12 12.05 Total output regulation range 11.4 V 12.6 V Dynamic load regulation range 11.4 V 12.6 V Output ripple 120 mVp-p Adjustment range N/A Output current 0.0 A 3.5 A Current sharing N/A Capacitive loading 1 F 4700 F Start-up from AC to output 20 ms 2000 ms Protections Main Output 3 Overcurrent protection 107% 130% 3 Overvoltage protection 13.5 V 14.5 V Undervoltage Protection 10.0 V 10.5 V 4 Overtemperature protection Yes 4 Fan fault protection Yes Standby Output 4 Overcurrent protection 110% 150% 3 Overvoltage protection 13.5 V 15.0 V 4 Undervoltage protection 10.0 V 10.5 V 1 Minimum current for transient load response testing only. Unit is designed to operate and be within output regulation range at zero load 2 Output voltage will stay within regulation during a 50% step load with a minimum starting load of 41A 3 Latch mode 4 Auto-recovery