HPS3000-9-001 Artesyn Embedded Technologies

POWER HPS3000 Series Data Sheet 3000 Watts Distributed Power Bulk Front-End Single Output SPECIAL FEATURES 3000 W output power 40 W/cu-in Optional customer provided air 1U x 3U form factor N+1 redundant Internal OR-ing 5 V housekeeping High efficiency 89% 200 Vac, 100% load Variable speed smart fans Electrical Specifications Two year warranty Input Input range (operating) 180 - 264 Vac COMPLIANCE 90 - 140 Vac POE Isolation Nominal input 200 Vac Input through Card Edge Connection EMI Class B - EN55022 110 Vac on same end as DC output EN61000 Immunity Frequency 47 to 63 Hz Input fusing Internal 25 A fuses Both lines fused SAFETY Inrush current 40 A peak Either hot or cold start UL/cUL 60950 Power factor 0.97 typical Meets EN61000-3-2 CSA 60950 Harmonics Meets IEC 1000-3-2 requirements 50% load Nemko TUV Input current 19 A max input current CB Report Holdup time 10 ms minimum At full rated load Leakage current 1.4 mA At 240 Vac Power line transient MOV directly after the fuse Note: HPS3000-9-001 variant available for applications with higher airflow requirementsHPS3000 Series Data Sheet Output Output rating 48 V 62.0 A 180 - 264 Vac 5 Vsb 3.0 A 48 V 29.4 A 90 - 140 Vac 5V 3 A 2 Set point 48 V Programmable 96-117% through I C serial bus Total regulation range 48 V 5% Line/load/transient when measured at output connection 5 Vsb 4% Rated load 3000 W maximum 200 Vac Input No derating over operating temp range 1500 W maximum 110 Vac Input Minimum load 48 V 0.0 A No loss of regulation 5 Vsb 0.0 A Output noise 480 mV max P-P 48 V output 100 mV max P-P 5 Vsb output Measured with a 0.1F Ceramic and 10 F Tantalum capacitor on any input Output voltage overshoot 5% maximum Nominal Voltage Setting Transient response 5% maximum deviation 50% load step 1 A/us Step load valid between 10% to 100% of output rating. Max units in parallel Up to 4 Total power in 1U 19 rack is 12 KW Short circuit protection 120% - 130% of rated output Output to return Output isolation Per POE specs >2000 Vac Forced load sharing Within 6.25 A of all shared outputs Digital sharing control Over current protection (OCP) 120% to 130% 48 V output 110% to 140% 5 Vsb output Over voltage protection (OVP) 110% to 133% 48 V output 110% to 125% 5 Vsb output Over temperature protection 10 - 15 deg C above safe operating area Both PFC and output converter monitored 5 Vsb will operate under overtemperature condition. Built in hysteresis Environmental Specifications Vibration/Shock: Non-operational 5G Sine sweep from 5 Hz to 500 Hz, dwelling at resonant frequencies for 1 hour each Operating Temperature: - 10 to +40 C Storage Temperature: - 40 to +85 C Cooling External fans with Fan Fail and Fan Speed control Operating Relative Humidity: 5% to 95% non-condensing Storage Relative Humidity: 5% to 95% non-condensing Operating Altitude Up to 10,000 feet above sea level Storage Altitude: Up to 30,000 feet above sea level RoHS Compliant: Yes