ARTESYN LPS25 SERIES 25 Watts XXXX DATA SHEET Total Power: 25 - 40 Watts Input Voltage: 85 - 264 Vac 120 - 300 Vdc of Outputs: Single SPECIAL FEATURES SAFETY Universal input TUV 60950 11774-3336-1241 3 x 5 footprint (LC 84936) Less than 1U high cUL 60950 Remote sense CSA CSA 22.2-234 Level 3 Built-in EMI filter LR53982C Low output ripple NEMKO EN 60950/EMKO-TUE Adjustable output P95100442 (74-sec) 203 Overvoltage protection CB Certificate and report Overload protection 1577, 1578, 1579, 1580 110 KHz switching frequency CE Mark (LVD) LPX40 enclosure kit available RoHS compliant Two year warranty 2020 Advanced Energy Industries, Inc.LPS25 ELECTRICAL SPECIFICATIONS Input Input range 85 - 264 Vac 120 - 300 Vac Frequency 47 - 440 Hz Inrush current <15 A peak 115 Vac <30 A peak 230 Vac, cold start 25 C Input current 1 A max. (RMS) 115 Vac Efficiency 70% typical at full load EMI filter FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted Safety ground <0.5 mA 50/60 Hz, 264 Vac input leakage current Output Maximum power 25 W for convection 40 W with 30CFM forced air Adjustment range -5, +10% minimum Hold-up time 20 ms 25 W load, 115 Vac nominal line Overload protection Short circuit protection on all outputs Case overload protected 110-145% above peak rating Overvoltage protection 5 V output 5.7 to 6.7 Vdc. Other outputs 10% to 25% above nominal output Remote sense Compensates for 0.5 V lead drop minimum Will operate without remote sense connected Reverse connection protected ENVIRONMENTAL SPECIFICATIONS Operating temperature 0 to 50C ambient. Derate each output 2.5% per degree from 50 to 70C, -20C start up. Storage temperature -40C to +85C Electromagnetic susceptibility Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3 Humidity Operating non-condensing 5% to 95% RH Vibration Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75 G peak 5 Hz to 500 Hz, operational MTBF demonstrated >550,000 hours at full load and 25C ambient conditions 2 advancedenergy.com