POWER LPT50 Series Data Sheet 55 Watts Total Power: 47 - 55 Watts Input Voltage: 90 - 264 Vac 127 - 300 Vdc of Outputs: Triple Special FeaS Universal input 2 x 4 footprint Less than 1U high Overpower and short circuit protection High efficiency High MTBF Built in EMI filter (CISPR 22 Class B) LED power good indicator Electrical Specifications Input power < 74 watts Complies with EN61000-3-2 Input 85 kHz switching frequency Input range 90 - 264 Vac (wide range) 127-300 Vdc UL Class I approved Frequency 47 - 440 Hz LPX50 enclosure kit available Inrush current < 60 A peak 230 Vac, cold start 25 C RoHS compliant Efficiency 80% typical at full load EMI/RFI FCC Class B conducted CISPR 22 Class B conducted SaF EN55022 Class B conducted UL: UL 60950-1 Safety ground leakage current 0.5 mA 50/60 Hz 264 Vac input CSA: CSA-C22.2 No. 60950-1 Output TUV: EN60950-1 Maximum power 55 W for convection (LPT51, 47.4 W) CB: Certificate and report Hold-up time 10/ 20 ms 115/230 Vac input line CE: LVD & EMC Overpower protection Short circuit protection on all outputs. Case overpower protected 110-160% of normal rating Overvoltage protection 30-50% above nominal output Environmental Specifications 0 C to 50 C ambient. Derate each output as 2.5% per degree Operating temperature from 50 C to 70 C. -20 C startup Storage temperature -40 C to +85 C Electromagnetic susceptibility Designed to meet EN61000-4 -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity Operating non-condensing 10% to 95% RH Vibration IEC68-2-6 to the levels of IEC721-3-2 MTBF demonstrated > 550,000 hours at full load and 25 C ambient conditions ety tureLPT50 Series Data Sheet Ordering Information Ripple Maximum Load with 1 2 Model Number Output Voltage Minimum Load Peak Load Regulation 3 Convection Cooling P/P (PARD) +3.3 V 0.8 A 8 A 9 A 2% 50 mV LPT51 +5 V 0.1 A 3 A 4 A 6% 50 mV +12 V 0 A 0.5 A 1 A 5% 120 mV +5 V 0.5 A 8 A 9 A 2% 50 mV LPT52 +12 V 0.1 A 3 A 4 A 5% 120 mV -12 V 0 A 0.5 A 1 A 5% 120 mV +5 V 0.5 A 8 A 9 A 2% 50 mV LPT53 +15 V 0.1 A 2.4 A 3.2 A 5% 150 mV -15 V 0 A 0.5 A 0.7 A 5% 150 mV +5 V 0.5 A 8 A 9 A 2% 50 mV LPT54 +24 V 0.1 A 1.5 A 2 A 7% 240 mV +12 V 0 A 0.5 A 0.7 A 5% 120 mV 1. Peak current lasting < 15 seconds with a maximum 10% duty cycle. 2. At 25 C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 F (tantalum capacitor) in parallel with a 0.1 F capacitor at rated line voltage and load ranges. 4. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. Pin Assignments Connector LPT51 LPT52 LPT53 LPT54 SK1-1 Neutral Neutral Neutral Neutral SK1-3 Line Line Line Line SK2-1 +3.3 V +5 V +5 V +5 V SK2-2 +3.3 V +5 V +5 V +5 V SK2-3 Common Common Common Common SK2-4 Common Common Common Common SK2-5 +12 V -12 V -15 V +12 V SK2-6 5 V +12 V +15 V +24 V Mating Connectors Molex 09-50-8031 (USA) AC Input 09-91-0300 (UK) PINS: 08-52-0113 Molex 09-50-8061 (USA) DC Outputs 09-91-0600 (UK) PINS: 08-52-0113 Artesyn Embedded Power Connector Kit 70-841-006, includes all of the above