POWER LPX200 Enclosure Installation Notes LPX200 Cover Enclosure Kit LPX200 will fit the LPX20X-M and LPS36X-M power supplies. Ma 1 Base 1 Cover 4 M3x6mm Pan head screws with spring washer 4 M3x6mm countersunk screws OUTPUT CONNECTOR 1 M4 nut 1 M4 star washer 1 M4 spring washer 1 Plastic insulator sheet INPUT CONNECTOR INSULATOR GROUND STUD (4X)STANDOFF Installation Instructions and Notes 1 Place the insulator over the chassis as shown. 2 Place the power supply over the insulator as shown. 3 Align the power supply to the chassis standoff. 4 Secure 4 pan head screws with washer provided with in kit as shown. 5 Place the cover over the power supply as shown. 6 Align the cover to the U-bracket countersink holes. 7 Secure 4 countersink screws provided with in kit as shown. 8 Overall dimensions: 5.9 (150mm) x 3.85 (98mm) x 1.85 (46.9mm). 9 Base plate has three sets of customer mountings: a. Bottom mounting (4X) M3 inserts. Max. scr ew penetration 0.0787 (2mm) plus 2 key ways. (See keyway detail) b. Side mounting (4X) M3 inserts. Max. screw penetration 0.236 (6mm) 10 Ensure insulator is correctly fitted in base under PCB to maintain safety creepage and clearances. 11 Ensure base is firmly connected to supply earth via the earth stud marked 12 When using this enclosure, ensure that relevant safety standards (e.g. EN60950) are complied with, in respect to creepage and clearance distances, and distances through insulation. 13 All dimensions are in inches (mm) terialsLPX200 Data Sheet Mechanical Drawing (2X)M3 INSERT 5.9 150 3.85 2.56 98 65 0.98 25 1.18 0.98 25 30 4.33 110 (2X)M3 INSERT 1.85 46.9 0.59 0.78 15 19.9 3.54 1.08 90 27.6 0.36 9.3 3.15 3.14 80 80 3.75 70 0.35 0.55 9 14.0 WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 14/F, Lu Plaza 2900 South Diablo Way Ground Floor Offices, Barberry House Suite B100 4 Harbour Buildings, Waterfront West 2 Wing Yip Street Kwun Tong, Kowloon Tempe, AZ 85282, USA Brierley Hill, West Midlands +1 888 412 7832 DY5 1LN, UK Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn Embedded Power, Artesyn, and all Artesyn related logos are For more information: www.artesyn.com trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are For support: productsupport.ep artesyn.com trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. 2019 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. LPX200 Rev. 20Dec2019