Embedded Power for Business-Critical Continuity Rev. 7.01.09 39 LPX40/60 Enclosure 1 of 2 LPX40/60 Enclosure Installation Notes LPX40 and LPX60 Cover Enclosure Kit LPX40 will fit the LPX2X and LPX4X power supplies. LPX60 will fit LPX6X power supplies. Materials 1 Base 1 Cover (top and sides perforated) 6 M3 x 6mm screws with captive washer Installation Instructions and Notes 1 M4 nut 1. Place the insulator over the chassis as shown For earth stud 1 M4 star washer 2. Place the power supply over the insulator as shown 1 M4 spring washer 1 Plastic insulator sheet 3. Align the power supply to the chassis standoff 4. Secure 4 pan head screws with washer provided with in kit as shown 5. Place the cover over the chassis 6. Align the cover to the U-bracket countersink holes 7. Secure 2 countersink screws provided with in kit as shown 8. Overall dimensions: LPX 25/40: 5.9 (150) x 3.86 (98) x 1.5 (38) LPX 60: 5.9 (150) x 3.86 (98) x 1.97 (50) 9. Base plate has three sets of customer mountings: a. Bottom mounting (4X) M3 inserts. Max. screw penetration 0.0787 (2mm) b. Side mounting (2X) 4mm clear holes plus 2 keyways. (See keyway detail) c. Side mounting (4X) M3 inserts. Max. screw penetration 0.236 (6mm) 10. Ensure insulator is correctly fitted in base under PCB to maintain safety creepage and clearances. 11. Ensure base is firmly connected to supply earth via the earth stud marked 12. When using this enclosure, ensure that relevant safety standards (e.g. EN60950) are complied with, in respect to creepage and clearance distances, and distances through insulation. 13. All dimensions are in inches (mm)Embedded Power for Business-Critical Continuity Rev. 7.01.09 39 LPX40/60 Enclosure 2 of 2 Americas Mechanical Drawing 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.PowerConversion.com techsupport.embeddedpower emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. 2009 Emerson Electric Co.