Embedded Power for Business-Critical Continuity Rev.02.16.07 NFS110 Series 1 of 4 NFS110 Series Single and quad output Total Power: 80 - 110W Input Voltage: 85 - 264VAC 120 - 370VDC of Outputs: Single, quad Special Features 7.0 x 4.25 x 1.8 inch package Overvoltage and The NFS110 series is a 110 W universal input ac-dc power supply short circuit protection 110 W with 20 CFM on a 7 x 4.25 inch card. The NFS110 series has four single and Adjustable outputs three quad output models and has proven itself to be highly EN55022, EN55011 conducted emissions level B reliable and versatile product for a wide range of communication UL, VDE and CSA and industrial applications, with a very high peak current safety approvals CE mark capability on each output for drive and motor applications. The Available RoHS compliant NFS110 provides 80 W of output power with free air convection 2 year warranty cooling which can be boosted to 110 W with 20 CFM of air. Standard features include overvoltage and short circuit protection. The series, with full international safety approval and the CE mark, meets conducted emissions EN55022 level B. The NFS110 series is designed for use in low power data networking, computer, telecom and industrial applications such as servers, Safety thermal printers, storage devices, vending machines and POS VDE0805/EN60950/ equipment. IEC950/IEC1010 File No. 10401-3336-0213 Licence No. 40014677 UL1950 File No. E136005 CSA C22.2 No. 950 File No. LR41062CEmbedded Power for Business-Critical Continuity Rev.02.16.07 NFS110 Series Specifications 2 of 4 All specifications are typical at nominal input, full load at 25C unless otherwise stated OUTPUT SPECIFICATIONS GENERAL SPECIFICATIONS Voltage adjustability +5.1 V o/p on multis 3.0% Hold-up time 110 Vac 80 W 35 ms 5.1 V single output 3.0% 110 Vac 110 W 17 ms 12 V single output 12-14 V 230 Vac 80 W 140 ms 15 V single output 15-18 V 230 Vac 110 W 100 ms 24 V single output 24-30 V Efficiency Multiple outputs 70% typical Line regulation LL to HL, FL 0.1% max. +5.1 V single 70% typical All outputs on all units 12 V and 15 V singles 72% typical 24 V single 75% typical Overshoot/undershoot At turn-on 0% Isolation voltage Input/output 3000 Vac Temperature coefficient All outputs 0.02%/C Input/chassis 1500 Vac Overvoltage protection Multi o/p 5.1 V only 6.25 V 0.75 V Switching frequency At 100 Watts output 20-70 kHz 5.1 V single 6.25 V 0.75 V At zero load 100-250 kHz 12 V single 15.75 V 1.0 V 15 V single 22 V 1.5 V Approvals and VDE0805, EN60950, IEC950 24 V single 33 V 2.5 V standards IEC1010, UL1950 (See Note 12) CSA C22.2 No. 950 Output power limit Primary power Pin max. 160 W limited Pout min. 110 W Weight Singles 550 g (19.4 oz) Multiple outputs 600 g (21.2 oz) Minimum output current (See Note 13) 0 A MTBF (See Note 9) MIL-HDBK-217E 125,000 hours Short circuit protection Burst mode operation ENVIRONMENTAL SPECIFICATIONS INPUT SPECIFICATIONS Thermal performance Operating, see curve 0 C to +70 C (See Notes 9, 10) Non-operating 40 C to +85 C Input voltage range 85-264 Vac 120-370 Vdc 0 C to +50 C, 80 W amb. convection cooled Input frequency range 47-440 Hz +50 C to +70 C, Derate 2 W/C amb. convection cooled Input surge current 230 Vac 35 A 0 C to +50 C, 110 W 20 CFM forced air Safety ground 110 Vac, 50 Hz 0.2 mA, max. leakage current 230 Vac, 50 Hz 0.4 mA, max. +50 C to +70 C, Derate 20 CFM forced air 2.75 W/C Peak, 0 C to +50 C, 110 W EMC CHARACTERISTICS max. 60 seconds Conducted emissions EN55022, FCC part 15 Level B Relative humidity Non-condensing 5% to 95% RH Radiated emissions EN55022, FCC part 15 Level A ESD air EN61000-4-2, level 3 Perf. criteria 1 Altitude Operating 10,000 feet max. ESD contact EN61000-4-2, level 4 Perf. criteria 1 Non-operating 40,000 feet max. Surge EN61000-4-5, level 3 Perf. criteria 1 Fast transients EN61000-4-4, level 3 Perf. criteria 1 Vibration (See Note 11) 5-500 Hz 2.4 G approx. Radiated immunity EN61000-4-3, level 3 Perf. criteria 2 Conducted immunity EN61000-4-6, level 3 Perf. criteria 1