process yellow 116 1375 1797 375 3405 313 2985 240 Embedded Power for Business-Critical Continuity 242 2607 Rev. 11.2.09 69 NFS110 Series 1 of 5 652 NFS110 Series Single & Quad output Total Power: 80 - 110 W Input Voltage: 85 - 264 Vac 120 - 370 Vdc of Outputs: Single, quad Electrical Specifications Special Features Output 7.0 x 4.25 x 1.8 inch package Voltage adjustability: +5.1 V o/p on multis 3.0% Overvoltage and short circuit 5.1 V single output 3.0% protection 12 V single output 12 - 14 V 110 W with 20 CFM 15 V single output 15 - 18 V Adjustable outputs 24 V single output 24 - 30 V EN55022, EN55011 conducted Line regulation: LL to HL, FL 0.1% max. emissions level B All outputs on all units UL, VDE and CSA safety Overshoot/undershoot: At turn-on 0% approvals CE mark Temperature coefficient: All outputs 0.02%/C Available RoHS compliant Overvoltage protection: Multi o/p 5.1 V only 6.25 V 0.75 V 2 year warranty 5.1 V single output 6.25 V 0.75 V 12 V single output 15.75 V 1.0 V 15 V single output 22 V 1.5 V 24 V single output 33 V 2.5 V Output power limit: Primary power limited Pin max. 160 W Pout min. 110 W Minimum output current: (See Note 13) 0 A Safety Short circuit protection: Burst mode operation VDE0805/EN60950/ Input IEC950/IEC1010 Input voltage range: 85 - 264 Vac File No. 10401-3336-0213 120 - 370 Vdc Licence No. 4001467 7 Input frequency range: 47 - 440 Hz UL1950 File No. E132002 Input surge current: CSA C22.2 No. 950 230 Vac 35 A File No. LR41062C Safety ground leakage current: 110 Vac, 50 Hz 0.2 mA, max. 230 Vac, 50 Hz 0.4 mA, max. All specifications are typical at nominal input, full load at 25 C unless otherwise statedprocess yellow 116 1375 1797 375 3405 313 2985 240 242 Embedded Power for Business-Critical Continuity 2607 Rev. 11.2.09 69 NFS110 Series 2 of 5 652 EMC Characteristics Conducted emissions: EN55022, FCC part 15 Level B Radiated emissions: EN55022, FCC part 15 Level A ESD air: EN61000-4-2, level 3 Perf. criteria 1 ESD contact: EN61000-4-2, level 4 Perf. criteria 1 Surge: EN61000-4-3, level 3 Perf. criteria 1 Fast transients: EN61000-4-4, level 3 Perf. criteria 1 Radiated immunity: EN61000-4-5, level 3 Perf. criteria 2 Conducted immunity: EN61000-4-6, level 3 Perf. criteria 1 General Specifications Hold-up time: 110 Vac 80 W 35 ms 110 Vac 110 W 17 ms 230 Vac 80 W 140 ms 230 Vac 100 W 100 ms Efficiency: Multiple outputs 70% typical +5.1 V single 70% typical 12 V and 15 V singles 72% typical 24 V single 75% typical Isolation voltage: Input/output 3000 Vac Input/chassis 1500 Vac Approvals and standards: VDE0805, EN60950, IEC950, IEC1010, UL1950, CSA C22.2 No. 950 (see note 12) Weight: Singles 550 g (19.4 oz) Multiple outputs 600 g (21.2 oz) MTBF ( 25 C): MIL-HDBK-217E 125,000 hours min. Environmental Specifications Thermal performance: Operating ambient 0 C to +70 C (See notes 9, 10) Non-operating -40 C to +85 C 0 C to 50 C convection cooled 80 W +50 C to +70 C, convection cooled Derate 2 W/C 0 C to +50 C, 20 CFM forced air 110 W +50 C to +70 C, 20CFM forced air Derate 2.75 W/C Peak, 0 C to +50 C, max. 60 seconds 110W Relative humidity: Non-condensing 5 to 95% RH Altitude: Operating 10,000 feet max. Non-operating 40,000 feet max. Vibration: 5 - 500 Hz 2.4 G rms peak (See Note 11)