Embedded Power for Business-Critical Continuity Rev.02.16.07 NFS80 Series 1 of 4 NFS80 Series Quad output Total Power: 80 - 110W Input Voltage: 90 - 264VAC 120 - 370VDC of Outputs: Quad Special Features 7.0 x 4.25 x 1.8 inch package Overvoltage and The NFS80 series is a 80 W universal input ac-dc power supply on a short circuit protection 80 W with free air convection 7 x 4.25 inch card. The NFS80 series has two quad output models Adjustable outputs with a very high peak capability on the auxiliary outputs for drive Isolated output Floating fourth output and motor applications. The NFS80 provides 80 W of output EN55022, EN55011 power with free air convection cooling which can be boosted to conducted emissions level B UL, VDE and CSA 110 W with 20 CFM of forced air. Standard features include safety approvals overvoltage and short-circuit protection. The series, with full Available RoHS compliant international safety approval and the CE mark, meets conducted 2 year warranty emissions EN55022 level B. The NFS80 series is designed for use in low power data networking, computer, telecom and industrial applications such as servers, PABX s, storage devices, vending machines and printers. Safety VDE0805/EN60950/ IEC950/IEC1010 File No. 10401-3336-0213 Licence No. 40014677 UL1950 File No. E136005 CSA C22.2 No. 950 File No. LR41062CEmbedded Power for Business-Critical Continuity Rev.02.16.07 NFS80 Series Specifications 2 of 4 All specifications are typical at nominal input, full load at 25C unless otherwise stated (11,C) OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Output voltage +5 V output on multis 3.0% Surge EN61000-4-5, level 3 Perf. criteria 1 adjustability Vout on singles Fast transients EN61000-4-4, level 3 Perf. criteria 1 Radiated immunity EN61000-4-3, level 3 Perf. criteria 1 Line regulation Main output 0.1% max. Conducted immunity EN61000-4-6, level 3 Perf. criteria 1 LL to HL, FL Auxiliary outputs 0.1% max. GENERAL SPECIFICATIONS Total regulation (See Note 5) See table Hold-up time 110 Vac, 80 W 35 ms Overshoot/undershoot At turn-on 0% 110 Vac, 110 W 17 ms 230 Vac, 80 W 140 ms Transient response +5 V (1 A to 12 A) 150 mV peak 230 Vac, 110 W 100 ms 1 ms recovery Efficiency 70% typical Temperature coefficient All outputs 0.02%/C Isolation voltage Input/output 3000 Vac Overvoltage protection +5 V output 140% Vout max. Input/chassis 1500 Vac Minimum output current Main output 1 A Switching frequency 20-70 kHz See derating curve Auxiliary output 0 A Approvals and VDE0805, EN60950, IEC950 Output power limit Primary power limit 160 W Pin max. standards IEC1010, UL1950 110 W Pout min. (See Note 10) CSA C22.2 No. 950 Short circuit protection Yes with auto recovery Weight 600 g (21.18 oz) INPUT SPECIFICATIONS MTBF (See Note 7) MIL-HDBK-217E 25 C 250,000 hours Input voltage range Universal input 90-264 Vac ENVIRONMENTAL SPECIFICATIONS 120-370 Vdc Thermal performance Operating, see curve 0 C to +70 C Input frequency range 47-440 Hz Non-operating 40 C to +85 C 50 C to +70 C Derate Input surge current 115 Vac, cold start 19 A natural convection 2 W/C 230 Vac, cold start 38 A 50 C to +70 C Derate Safety ground 110 Vac, 60 Hz 0.2 mA 20 CFM forced air cooling 2.75 W/C leakage current 230 Vac, 50 Hz 0.4 mA Relative humidity 5% to 95% RH (11,C) EMC CHARACTERISTICS Altitude Operating 10,000 feet max. Non-operating 30,000 feet max. Conducted emissions EN55022,FCC part 15 Level B Radiated emissions EN55022 FCC part 15 Level B Vibration (See Note 9) 5-500 Hz 2.4 G rms approx. ESD air EN61000-4-2, level 3 Perf. criteria 1 ESD contact EN61000-4-2, level 4 Perf. criteria 1