POWER Installation Notes NLP250CJ Enclosure NLP250CJ Cover Accessory Kit NLP250CJ will fit the NLP250 power supplies. MATERIALS One (1) cover Four (4) M3x8 mm countersunk screws GAP PAD ON MAIN TRANSFORMER M3 C SINK SCREW WITH 8mm LONG (4X) Installation Instructions and Notes 1. Place the cover over the NLP250 as shown. 2. Align the cover to the U-bracket countersink holes. 3. Secure four (4) countersink screws provided with in kit as shown. 4. Overall dimensions: 7 (177.8 mm) x 4 (101.6 mm) x 1.6 (40.64 mm). 5. When using this enclosure, ensure that relevant safety standards (e.g., EN60950) are complied with, in respect to creepage and clearance distances, and distances through insulation. 6. All dimensions are in inches (mm)NLP250CJ Enclosure Installation Notes Mechanical Drawing 7.00 VR7 (177.8) 1 N L E J1 WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Waterfront Business Park 14/F, Lu Plaza Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street USA West Midlands, DY5 1LX Kwun Tong, Kowloon +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks For more information: www.artesyn.com/power and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are For support: productsupport.ep artesyn.com trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. 2017 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal NLP250CJ Enclosure Installation Notes 31May2017 terms and conditions, please visit www.artesyn.com/legal. 4 (101.6) J4 JP1 J2 J3 1.6 (40.64)