POWER NPS60-M Series Data Sheet 60 Watts Total Power: 60 Watts Input Voltage: 90 - 264 VAC 127 - 300 VDC of Outputs: Single SPECIAL FEATURES Medical and ITE Safety Approvals Universal input Less than 1U high 2 x 4 footprint Remote sense Overload and short circuit protection Adjustable output voltage High ef ciency Electrical Speci cations High MTBF Input Built in EMI lter (CISPR 22 Class B) Input ra nge: 90 - 264 VAC (wide range) 127-300 Vdc International Ef ciency Level V, Energy Star 2.0 & CeC compliant Frequency: 47 - 63 Hz (except NPS62-M) Inrush current: < 50 A peak 230 VAC, cold start 25 C Less than 300 mW no-load power Input power: < 74 Watts consumption Efciency: 87% average (as per Energy Star 2.0 standard) (NPS62-M, 80%) 0C to +80C operation EMI/RFI: FCC Class B conducted CISPR 22 Class B conducted EN55022 Input power < 74 watts Class B conducted, VDE0878PT3 Class B conducted Complies with EN61000-3-2 Safety ground 275uA 50/60 Hz 264 VAC input UL Class I approved leakage current: Class II approved (with Class A EMI) LPX50 enclosure kit available Output Dual AC fuses Maximum power: 60 W for convection Adjustment range: 20% minimum SAFETY Hold-up time: 13/75 ms 115/230 VAC input line TUV: 60950, 60601-1 Overload protection: Short circuit protection on all outputs. Case overload protected 110-160% of normal rating UL: 60950, 60601-1 CSA: 60950, 60601-1 Overvoltage protection: 30-50% above nominal output NEMKO: 60950, 60601-1 Remote sense: Compensated for 0.5 V lead drop max. Will operate without remote sense connected. Reverse connection protected. CB: Certi cate and report CE: Mark (LVD) CCC: Mark NPS60-M Series Data Sheet Environmental Speci cations Operating temperature: 0 to 50 C ambient derate each output at 2.5% per degree from 50 to 80 C. -20 C start up Storage temperature: -45 C to +85 C Electromagnetic susceptibility: Designed to meet EN61000-4 -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity: Operating non-condensing 10% to 90% RH Vibration: IEC68-2-6 to the levels of IEC721-3-2 MTBF demonstrated: > 550,000 hours at full load and 25 C ambient conditions Mechanical Drawing BARCODE SERIAL LABEL VR1 4.00 0.87 OUTPUT VOLTAGE (101.6) (22) 3.73 ADJUST POT M1 NPS62-M 1.14 (29) (94.6) GND TAB (CN1) PIN 1 PIN 1 SK2 SK1 PIN 6 PIN 3 INPUT CONNECTOR (SK1) M2 6 PIN OUTPUT MODEL LABEL 0.16 (4.0) MOUNTING HOLE CONNECTOR (4 PLACES) (SK2) ROHS LABEL 0.197 (5.0) MINIMUM STANDOFF HEIGHT 1.01 1.72 (26) (43.8) NPS62-M 1.28 (32.6) 2.00 (50.8)