FZT600TA Diodes Incorporated

FZT600 / FZT600B Green 140V NPN DARLINGTON TRANSISTOR IN SOT223 Features Mechanical Data BV > 140V Case: SOT223 (Type DN) CEO BV > 160V Case Material: Molded Plastic. Green Molding Compound CBO I = 2A High Continuous Current UL Flammability Rating 94V-0 C NPN Darlington With Gain > 10k Moisture Sensitivity: Level 1 per J-STD-020 Guaranteed h Specified up to 1A Terminals: FinishMatte Tin Plated Leads, Solderable per FE Lead-Free Finish RoHS Compliant (Notes 1 & 2) MIL-STD-202, Method 208 Halogen and Antimony Free. Green Device (Note 3) Weight: 0.112 grams (Approximate) Qualified to AEC-Q101 Standards for High Reliability An Automotive-Compliant Part is Available Under Separate Datasheet (FZT600BQ) SOT223 Top View Device Symbol Top View Pin-Out Ordering Information (Note 5) Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel FZT600TA AEC-Q101 FZT600 7 12 1000 FZT600BTA AEC-Q101 FZT600B 7 12 1000 Notes: 1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied. 2. See FZT600 / FZT600B Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage 160 V V CBO Collector-Emitter Voltage 140 V V CEO Emitter-Base Voltage 10 V V EBO Continuous Collector Current I 2 A C Peak Pulse Current I 4 A CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit (Note 5) 3.0 (Note 6) 2.0 Power Dissipation P W D (Note 7) 1.6 (Note 8) 1.2 (Note 5) 41.7 (Note 6) 62.5 Thermal Resistance, Junction to Ambient R JA (Note 7) 78.1 C/W (Note 8) 104 Thermal Resistance Junction to Lead (Note 9) R 12.9 JL Operating and Storage Temperature Range T T -55 to +150 C J, STG ESD Ratings (Note 10) Characteristic Symbol Value Unit JEDEC Class 2 Electrostatic DischargeHuman Body Model ESD HBM 2000 V B Electrostatic DischargeMachine Model ESD MM 200 V Notes: 5. For a device mounted with the collector lead on 50mm 50mm 2oz copper that is on a single-sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in a steady-state. 6. Same as Note 6, except the device is mounted on 25mm 25mm 2oz copper. 7. Same as Note 6, except the device is mounted on 25mm 25mm 1oz copper. 8. Same as Note 6, except the device is mounted on minimum recommended pad layout. 9. Thermal resistance from junction to solder-point (at the end of the collector lead). 10. Refer to JEDEC specification JESD22-A114 and JESD22-A115 2 of 7 July 2018 FZT600 / FZT600B Diodes Incorporated www.diodes.com Document number: DS33145 Rev. 5 - 2