PI6C557-03AQ PCIe 2.0 Clock Generator with 2 HCSL Outputs for Automotive Applications Features Description PCIe 2.0 compliant e PTh I6C557-03AQ is a spread spectrum clock generator compli - ant to PCI Express 2.0 and Ethernet requirements. The device is Phase jitter - 2.1ps RMS (typ) used for PC or embedded systems to substantially reduce Electro- LVDS compatible outputs magnetic Interference (EMI). Supply voltage of 3.3V 10% 25MHz crystal or clock input frequency e PTh I6C557-03AQ provides two differential (HCSL) or LVDS HCSL outputs, 0.8V Current mode differential pair spread spectrum outputs. The PI6C557-03AQ is configured to se - Jitter 35ps cycle-to-cycle (typ) lect spread and clock selection. Using Pericom s patented Phase- Locked Loop (PLL) techniques, the device takes a 25MHz crystal Spread of -0.5%, -0.75%, and no spread input and produces two pairs of differential outputs (HCSL) at AEC-Q100 qualified 25MHz, 100MHz, 125MHz and 200MHz clock frequencies. It Spread Bypass option available also provides spread selection of -0.5%, -0.75%, and no spread. Spread and frequency selection via external pins Packaging: (Pb-free and Green) 16-pin TSSOP (L16) Block Diagram Pin Configuration (16-Pin TSSOP) VDD 2 SS1:SS0 1 S0 CLK0 16 VDDX 2 Control CLK0 2 S1 15 CLK0 Logic S1:S0 Phase 2 3 SS0 Lock 14 CLK0 Loop 4 X1/CLK 13 GNDA CLK1 X1/CLK 5 X2 12 VDDA CLK1 Crystal 25 MHz Driver 6 crystal or clock OE 11 CLK1 X2 7 GNDX 10 CLK1 2 Pulling R R 8 Capacitors SS1 9 IREF GND OE All trademarks are property of their respective owners. www.pericom.com PI6C557-03AQ Rev A 05/22/14 14-0076 1PI6C557-03AQ PCIe 2.0 Clock Generator with 2 HCSL Outputs for Automotive Applications Pin Description Pin Pin Name I/O Type Description 1 S0 Input Select pin 0 (Internal pull-up resistor). See Table 1. 2 S1 Input Select pin 1 (Internal pull-up resistor). See Table 1. 3 SS0 Input Spread Select pin 0 (Internal pull-up resistor). See Table 2. 4 X1/CLK Input Crystal or clock input. Connect to a 25MHz crystal or single ended clock. 5 X2 Output Crystal connection. Leave unconnected for clock input. 6 OE Input Output enable. Internal pull-up resistor. 7 GNDX Power Crystal ground pin. 8 SS1 Input Spread Select pin 1 (Internal pull-up resistor). See Table 2. 9 IREF Output Precision resistor attached to this pin is connected to the internal current reference. 10 CLK1 Output HCSL compliment clock output 11 CLK1 Output HCSL clock output 12 VDDA Power Connect to a +3.3V source. 13 GNDA Power Output and analog circuit ground. 14 CLK0 Output HCSL compliment clock output 15 CLK0 Output HCSL clock output 16 VDDX Power Connect to a +3.3V source. Table 1: Output Select Table Table 2: Spread Selection Table S1 S0 CLK(MHz) SS1 SS0 Spread 0 0 25 0 0 No Spread 0 1 100 0 1 Down -0.5 1 0 125 1 0 Down -0.75 1 1 200 1 1 No Spread All trademarks are property of their respective owners. www.pericom.com PI6C557-03AQ Rev A 05/22/14 14-0076 2