DFB-1310-10LR-LCA Finisar

F i n i s a r Preliminary Product Specification 1310nm DFB Laser Diode LC TOSA DFB-1310-10LR-LCA PRODUCT FEATURES Supports 9.95 to 10.5Gb/s bit rates Extended temperature range -5C to 85C Uncooled 1310nm DFB Laser LC interface APPLICATIONS 10GBASE-LR 10G Fiber Channel The DFB-1310-10LR-LCA is specifically designed for applications based on several optical communications standards, including IEEE 10GBASE-LR, STM64, STM64 FEC, 10GFC, 10G GbE, 10G GbE FEC, & 10GFC FEC. Excellent optical performance is achieved by matching the electrical characteristics of the TOSA and laser to the external circuitry. The TOSA is designed to be paired with the 10G LR ROSA PIN-1310-10LR-x available at DFB-1310-10LR-LCA Product Specification Oct 2014 F i n i s a r I. Absolute Maximum Ratings Parameter Rating Storage Temperature -40 to +85C Case Operating Temperature -5C to +85C Lead Solder Temperature 260C, 10 sec. Continuous Optical Power 20mW Laser Diode Reverse Voltage 2V Laser Diode Continuous Forward 130mA current Monitor Photodiode Reverse Voltage 10V Monitor Photodiode Reverse Current 2mA Notice Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. Notice The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product Confidential and Proprietary 2014 Finisar Corporation. All rights reserved Rev. B00 Page 2