FP-1310-4I-LCC Finisar

F i n i s a r Product Specification 1310nm FABRY-PEROT (FP) LASER DIODE, LC TOSA FP-1310-4I-LCB, FP-1310-4I-LCC PRODUCT FEATURES Wide operating temperature (-40C to 85C) Stable threshold current for easy transmitter control (T ~ 80K) 0 1310 nm typical emission wavelength FP-LDs High-speed modulation capability (Up to 4Gb/s) Excellent reliability Ultra-low gradual wear-out rates <1% failures in 20 yrs at 55C The FP-1310-4I-LCx is an MOCVD grown InAlGaAs ridge laser diode with emission wave-length of 1310 nm and standard continuous light output of 5mW per facet. These lasers provide stable, single transverse mode oscillation. These are hermetically sealed devices in a coaxial package (TO-56) with an integrated photodiode to monitor the optical output. Suitable as a light source in data-com and telecom applications with data rates up to 4 Gb/s. PRODUCT SELECTION Part Number Description FP-1310-4I-LCB 1310 nm Fabry-Perot (FP) Laser Diode, LC TOSA package FP-1310-4I-LCC 1310 nm Fabry-Perot (FP) Laser Diode, LC TOSA package, low power. Confidential and Proprietary 2014 Finisar Corporation. All rights reserved Rev. B00 Page 1 FP-1310-4I-LCX Product Specification Oct 2014 F i n i s a r I. Absolute Maximum Ratings Parameter Rating FP-1310-4I-LCA 10mW FP-1310-4I-LCB 5mW Output Power, CW FP1310-4I-LCC 2mW FP-1310-4I-SCC Reverse Voltage (laser diode) 2V Reverse voltage (monitor photodiode) 10V Forward current (photodiode) 1mA Operating temperature -40C to +85C Storage temperature -40C to +100C ESD Exposure (Human Body Model) 200V Notice Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. Notice The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product Confidential and Proprietary 2014 Finisar Corporation. All rights reserved Rev. B00 Page 2