13.9mm(39 pos.) 0.3 mm Pitch, 1.1 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors FH39 Series Small size (39 pos. shown) 1.1mm Easy FPC insertion Features 1. Low-profile 0.3mm pitch connector with top actuatoractuator and bottom contact Usable via either its top or bottom contact point, this connector achieves enhanced freedom in terms of the product design. 2. High contact reliability thanks to the spring terminal structure Because both top and bottom contact points are spring- loaded, the contact point adapts to the FPC motion, and FPCFPC high contact reliability is ensured. 3. Delivered with the actuator open FPC can be immediately inserted without the need for the opening of the actuator. Completely locked 4. Easy FPC insertion Entry chamfers at all sides of the FPC insertion slot assure correct insertion and positioning of the FPC. 5. Accepts standard FPC thickness 0.2mm thick standard Flexible Printed Circuit (FPC) can be used. This is the only ultra-low profile ZIF connector using standard FPC. 6. Conductive traces on the PCB can run under the connector No exposed contacts on the bottom of the connector. 7. Board placement with automatic equipment Flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. Standard reel packaging contains 5000 connectors. * 8. Halogen-free (FH39J Series) *As defined by IEC61249-2-21 Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm maximum 2013.11 1 3.45mmFH39 Series0.3 mm Pitch, 1.1 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors Specifications Operating Storage Current rating 0.2 A -55 to +85C (Note 1) -10 to +50C (Note 2) temperature range temperature range Ratings Operating Relative humidity 90% max. Storage Relative humidity 90% max. Voltage rating 30 Vrms AC humidity range (No condensation) humidity range (No condensation) Recommended FPC Thickness: 0.2 0.03 mm, Gold plated contact pads Item Specification Conditions 1.Insulation resistance 50 M min. 100 V DC 2.Withstanding voltage No flashover or insulation breakdown 90 Vrms AC / 1 minute 100 m max. 3.Contact resistance 1 mA, AC max (AC: 1kHz) * Including FPC and FFC conductor resistance Contact resistance: 100 m max. 4.Durability 10 cycles No damage, cracks, or parts dislocation No electrical discontinuity of 1s or longer Frequency: 10 to 55 Hz, 5.Vibration Contact resistance: 100 m max. single amplitude of 0.75 mm, No damage, cracks, or parts dislocation 10 cycles in each of the 3 axis No electrical discontinuity of 1s or longer 2 Acceleration of 981m/s , 6 ms duration, 6.Shock Contact resistance: 100 m max. sine half-wave, 3 cycles in each of the 3 axis No damage, cracks, or parts dislocation Contact resistance: 100 m max. 7.Humidity Insulation resistance: 50 M min. 96 hours at 40 and humidity of 90 to 95% (Steady state) No damage, cracks, or parts dislocation Contact resistance: 100 m max. Temperature:-55+15 to +35+85+15 to +35 8.Temperature cycle Insulation resistance: 50 M min. Time: 30 2 to 3 30 2 to 3 minutes No damage, cracks, or parts dislocation 5 cycles 9.Resistance to No deformation of components affecting Reflow: At the recommended temperature profile soldering heat performance Manual soldering: 350 5 for 5 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The termstorag refers to products stored for a long period prior to mounting and use. The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. Materials Part Material Finish Remarks LCP Color:Beige Insulator UL94V-0 PA Color:Black Contacts Gold plated ----------------- Phosphor bronze Metalfittings Pure tin reflow plated ----------------- Ordering information FH 39 J - 51S - 0.3 SHW (10) 1 2 3 4 5 6 7 Series name:FH Number of positions 1 4 2 Series No.:39 FH39 :25 to 61 Blank :Standard FH39A :67 3 A :Long actuator type FH39AJ :71 J :Halogen-free FH39J :25 to 51 (Flame retardance UL94V-0). Contact pitch:0.3mm 5 Termination type 6 SHW...SMT horizontal staggered row mount type Plating specifications 7 (10)...Standard 5,000 pieces/reel (99)...500 pieces/reel 2