0.5mm Pitch Connectors with Ground Plate for Board-to-Board Connections FX10 Series Ground plate Signal contact Housing Metal fitting Ground plate and metal fitting make contact Cross-Section of Mating Features 1. Improved Transmission Efficiency Between Boards Transmission characteristics have been improved through a design that fixes ground plates to both sides of the header and receptacle. 2. 10 Signal:1 Ground Arrangement Signal and ground are arranged in a ratio of 10:1 with the ground plate SMT connected to the board. The ground stability achieved serves to reduce noise. 3. Metal Fittings for Added Solder Weld Strength Metal fittings provide greater adhesion to the board, protecting against peeling. The unique connector design provides a connection between the fitting and the ground plate for a stronger ground. 4. Suited to High-Density Applications The signal contact pitch of 0.5 mm produces a smaller connector utilizing less board area for mounting. 5. High contact reliability Effective mating length is 1.1 mm for signal contacts. 6. Optional Ground Plate An alternate style without the ground plate is available. The space provided by the ground plate removal has been filled with additional signal contacts. BStack Height 7. Board-To-Board Dimensions of 4mm and 5 With ground plate mm Are Available Headers FX10 *P/*SV FX10 *P/*SV1 Receptacles FX10 *S/*SV 4mm 5mm Without ground plate Headers FX10*PSV FX10*PSV1 Receptacles 4mm 5mm FX10 *S SV Applications Notebook computers, PDA, and other miniature electronic equipment. A212 0.5mm 0.75mm 0.75mm FX10 Series 0.5mm Pitch Connectors with Ground Plate for Board-to-Board Connections Product Specifications -55 to 85 -10 to +60 (Note 1) Rated current 0.3 A (Note 1) Operating temperature range Storage temperature range Rating Relative humidity 95% or less Rated voltage 50 V AC Operating humidity range Storage humidity range -40 to 70% (Note 1) (No condensation) Item Requirements Conditions 1. Insulation resistance 100 M or greater Measured at 100 V DC 2. Voltage resistance No flashover or breakdown 150 V AC applied for one minute 3. Contact resistance 60 m or less Measured at 100 mA No electrical discontinuity for 1s or greater Frequency: 10 to 55 Hz, amplitude of 0.75 mm in 3 directions, 10 4. Vibration No damage, cracks, or parts looseness cycles each 2 No electrical discontinuity for 1s or longer Acceleration of 490 m/s , 11 ms duration, sine half-wave 5. Shock No damage, cracks, or parts looseness waveform, for 3 cycles in the both directions of each of the 3 axes 6. Damp heat Contact resistance of 70 m or less, insulation resistance of Temperature of 40, humidity of 90 to 95%, duration 96 h (Steady state) 100 M or greater, no damage, cracks, or parts looseness Contact resistance of 70 m or less, insulation resistance of Temperature: -55 15 to 35 85 15 to 35 7. Temperature cycle 100 M or greater, no damage, cracks, or parts looseness Time: 30 min. 2 to 3 min. 30 min. 2 to 3 min. for 5 cycles Contact resistance of 70 m or less 8. Durability 50 times No damage, cracks, or parts looseness 9. Resistance to Reflow: At the recommended temperature profile No melting of resin portion which affects performance soldering heat Soldering iron temperature: 360 for 5 seconds Note 1: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period. The operating temperature and humidity range are suited to the non-conducting condition following board assembly. Note 2: The aforementioned specifications are representative of this series. For information on specific parts, confirm with Sales Office. Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials Part Material Process Notes Insulator LCP Beige UL94V-0 Engagement Area: Gold plating of 0.1m Header Tenmination Area: Tin plating Contacts Phosphor bronze --- Engagement Area: Gold plating of 0.1m Receptacle Termination Area: Flash plating Ground plate Phosphor bronze Tin plating --- Metal fitting Phosphor bronze Tin plating --- Product Number Configuration - - FX10 P / SV 1 ( ) 1 2 4 5 6 7 3 1 Series name: FX10 5 Contact form 2 SV: Straight SMT Form Symbol 6 Product height A: With guide post Blank: Standard B: Without guide post Number of contacts 1 : Standard + 1mm 3 7 Packaging classification With ground plate Blank(71): Tray packaging Signal/Ground: 80/8, 100/10, 120/12, (21), (91): Embossed tape packaging 140/14 Without ground plate Signal: 96, 120, 144, 168 Connector type 4 P: Header S: Receptacle A213