The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
PCN Series Product Compliant to DIN41612/IEC603-2 Standard
PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,Wrapping Type)
Double-sided two point Contact System
PCN Series
Features
Single-sided two point Contact System
1. Compliant with DIN Standard
Comply with IEC603-2/DIN41612 standard.
2. Variation in number of contacts
10, 16, 20, 24, 28, 30, 32, 44, 48, 50, 64, 90, 96, 100, 128, and
144 contacts are available.
3. Two point contact construction
PCN10 and 12 series are constructed with high reliable double-
sided two point contacts.
PCN13 series pursues after cost performance, and constructed
with single sided two point contacts.
4. Broad applications
DIN standard types of B, C, R, and Q are available. The flux tight
product is available. The easy lock pin type to prefix the board is
available.
5. Stacking height variation
Stacking Connector
PCN10H series contains 25, 30, 35, 40 and 45mm stacking
height.
6. Circuit protection function available
PCN10MC series utilizes a sequence structure for circuit
protection function.
7. Cable connector
ID connector for ribbon cable is available.
The connector is prepared for crimping connection for AWC#26
to 30 cables.
Application
Control equipment, exchange, measuring instruments etc.
A14The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
PCN Series Product Compliant to DIN41612/IEC603-2 Standard
Product Specifications
+
Storage Temperature Range: -10 to 60 (Note 2)
+
Current rating: 2A Operating Temperature Range: -55 to 85 (Note 1)
Rating
Voltage rating: 300V AC
Operating Humidity Range: 85% max
Storage Humidity Range: 40 to 70% (Note 2)
Item Specification Condition
6
1.Insulation Resistance 10 M ohms 100V DC
2.Withstanding Voltage 1000V AC (insulation displacement, crimping type: 650V AC) /1 minute.
No flashover or insulation breakdown.
3.Contact Resistance 20m ohms max. 0.1A
4.Vibration No electrical discontinuity of 10s or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
6
5.Humidity(Steady state) Insulation resistance : 10 M ohms min. 96 hours at temperature of 40 and humidity of 90% to 95%
(-65 : 30 minutes 15 to 35: 5 minutes max.
6.Temperature Cycle
No damage, cracks, or parts looseness.
125 : 30 minutes 15 to 35: 5 minutes max.) 5 cycles
7.Durability (Mating/un-mating) 500 cycles
Contact resistance : 20m ohms max.
8.Resistance to Soldering heat
No deformation of components affecting performance. Manual soldering: 300 for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The termstorag refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
Material
Parts Material Finish Remarks
Insulator PBT Gray UL94V-0
Pin header Brass Contact area: Gold plated ---------------
Contact
Receptacle Copper alloy Remainer: Tin plated ---------------
Ordering Information
PCN 10 Series
PCN10 A * P 2.54 DS
1 2 3 4 5 6
1 Series Name : PCN10 3 Number of contacts: 2-row : 16, 20, 24, 32, 44, 50, 64, 90, 100
2 Blank 3-row : 48, 96, 144
A mold type (as listed below) 4-row : 128
}
B 4 Connector type : P : Pin header
C : Flux prevention type (DSA only) : S : Receptacle
D : Rack installation type 5 Contact pitch : 2.54mm
EA : With Board prefixed lock pin 6 Contact type
H : Stacking height 35mm type DS : Right angle through hole type
HA : Stacking height 30mm type DSA : Straight through hole type
HB : Stacking height 25mm type WA : Wrapping type (0.5tx0.7W)
HC : Stacking height 45mm type WB : Wrapping type (0.5tx0.5W)
HD : Stacking height 40mm type R : Insulation displacement type
MC : Circuit Protection function type
C : Crimping type
*
*
A15