2.5mm Pitch Connector for Discrete Wire Connection HNC Series Features 1. Full Lock Mechanism The connector is equipped with the full lock mechanism so as not be removed, unless locks are reset on both sides. This mechanism is activated effectively to prevent extraction by cable hooking or other causes. 2. Thin Type Connector Mounting height when the connector is used at the right angle : 4.8mm 3. Mechanism to Prevent Mis-insertion This thin type connector is equipped with the mechanism to prevent mis- insertion. 4. Tin Plating and Gold Plating Variation Two kinds of tin plating and gold plating types are available, and can be chosen according to application. The tin plating is also set to a light operating touch. Mechanism to prevent false-insertion Full lock Applications mechanism Various business equipment, financial terminals B169 Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.HNC Series2.5mm Pitch Connector for Discrete Wire Connection Product Specifications 22 AWG : 3A Operating Temperature Range -55 to +85 (Note 2) 24 AWG : 3A Current rating Operating Humidity Range -20 to 80% 26 AWG : 2A Rating (Note 1) 28 AWG : 1A Storage Temperature Range -10 to +60 (Note 3) 30 AWG : 0.5A Storage Humidity Range -40 to 70% (Note 3) Voltage rating 250V AC Item Specification Condition 1. Insulation Resistance 1000M min. 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 1000V AC/1 minute 3. Contact Resistance 10m Max Measured at a maximum of 20V, 1mA (DC or 1000Hz) 4. Insertion/Extraction Force Insertion force : 4.4N max. Extraction force : 0.4N min. Measure at the square steel pin of 0.6350.002mm 5. Vibration No electrical discontinuity of 10s or more 10 cycles in each of three axis at frequency 10-55Hz, half amplitude 0.75mm 6. Humidity (Steady state) Contact resistance : 10m max. Insulation resistance : 1000M min. 96 hours at temperature of 402 and humidity of 90% to 95% (-55 : 30 minutes 5 to 35 : 2 to 3 minutes 7. Temperature Cycle Contact resistance : 10m max. Insulation resistance : 1000M min. (-85 : 30 minutes 5 to 35 : 2 to 3 minutes) 5 cycles Tin plating : Contact resistance : 30m max. Tin plating : 30 cycles 8. Durability (Mating/un-mating) Gold plating : Contact resistance : 20m max. Gold plating : 50 cycles Flow : 250 for 5 seconds 9. Resistance to Soldering heat No deformation of components affecting performance. Manual soldering : 300 for 2 seconds Note 1 : The rated current will be changed according to cable sizes for use. The header rating only t is 3A. Note 2 : Includes temperature rise caused by current flow. Note 3 : The termstorag refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 4 : Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials / Finish Product Part Material Finish Remarks Crimping Socket Insulator Polyamide Black UL94V-2 Contact Contact Phosphor Bronze Tin plated or gold plated Insulator Polyamide Black UL94V-2 Pin Header Contact Brass Tin plated or gold plated Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Crimping Plug HNC 2 - 2.5 P - * DSL qwye r t q Series Name : HNC t Number of Contacts : 2 to 8,10,12,15 w Series No. : 2, 1 y Contact Type e Contact Pitch : 2.5mm None : Crimping socket r Connector Type DS : Straight S : Socket DSL : Right angle P : Pin Header Contact HNC - 2.5S - C - A qw e q Type: 2.5mm pitch socket e Applicable cable size w Packaging Type A : 22 to 26 AWG C : Reel B : 26 to 30 AWG D : Bag B170 Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.