CY8CKIT-142 PSOC 4 BLE MODULE CY8CKIT-142 PSoC 4 BLE Module is a certi ed, easy-to-use solution for creating complete BLE systems. It features a PSoC 4 BLE device, two crystals, a PCB antenna, and other passives and provides access to all GPIOs of the device. Visit www.cypress.com/BLE for more information on Cypresss BLE solutions. PSoC 4 BLE is an ARM Cortex -M0 based single-chip solution that integrates a programmable analog front end, programmable digital peripherals, CapSense touch-sensing technology, and a Bluetooth Low Energy or Bluetooth Smart radio. Antenna matching Wiggle antenna network (AMN) Ctank 24-MHz crystal Cmod P0 1 P0 0 GND VDDA P0 3 P0 2 P3 6 P3 7 P0 5 P0 4 P3 4 P3 5 P1 0 VREF P3 2 P3 3 P1 2 P1 1 P3 0 P3 1 P0 6 P1 4 P4 0 P5 1 P4 1 P5 0 P0 7 P1 3 P2 6 P2 7 XRES P1 5 P2 4 P2 5 GND P1 7 P2 2 P2 3 VDDD P1 6 P2 0 P2 1 SAR bypass capacitor VDDR GND (bottom side) 32.768-kHz crystal (bottom side) CY8C4247LQI-BL483 PSoC 4 BLE device 4-pin UART header Fig-1: Pinout Description for PSoC 4 BLE Module Note: To apply power to the module, use the VDD pin (1.9 V - 5.0 V) and GND pin. VDD GND P1 5 P1 4 CY8CKIT-142 PSOC 4 BLE MODULE TM STANDALONE USE WITH PSOC CREATOR IDE AND CY8CKIT-002 MINIPROG3 Step 1: Select the 5-pin connector setting in PSoC Creator or PSoC Programmer. Step 2: You can use 0.1 male headers (not included) or jumper wires. Pin Mapping CY8CKIT-002 CY8CKIT-142 VTARG VDD GND GND RES XRES SCLK P0 7 SDAT P0 6 Fig-2: Programming and Debugging with CY8CKIT-002 USING THE CY8CKIT-142 MODULE WITH CY8CKIT-042-BLE PIONEER KIT Step 1: Plug the module on the CY8CKIT-042-BLE Pioneer Kit baseboard. Step 2: Create your design in PSoC Creator IDE and use the BLE Pioneer Kit to program and debug. Fig-3: Programming and Debugging with CY8CKIT-042 BLE Pioneer Baseboard CY8CKIT-142 is quali ed for the Bluetooth 4.1 speci cation. The module, along with the CY8CKIT-042 BLE Pioneer Baseboard, has regulatory approval (for development purposes only) for the 2.4-GHz unlicensed frequency range in countries including USA (FCC), Canada (IC), Europe (CE), and Japan (JRF/TELEC). Additional regulatory certi cation will be required to integrate the module into an end product. Contact support cypress.com for details. For more information about this kit, visit www.cypress.com/CY8CKIT-142 CY8CKIT-142 Contains Model: CY8CKIT-142 Manufactured by Cypress Semiconductor. FCC ID: WAP-CY8CKIT-142 R 005-100919 IC: 7922A-CY8CKIT142 2015-2017 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks referenced herein are the properties of their respective owners. 001-96028 Rev.*D