CYBLE-214015-01
EZ-BLE Creator Module
General Description
The Cypress CYBLE-214015-01 is a fully certified and qualified Low power mode support
module supporting Bluetooth Low Energy (BLE) wireless
Deep Sleep: 1.3 A with watch crystal oscillator (WCO) on
communication. The CYBLE-214015-01 is a turnkey solution
Hibernate: 150 nA with SRAM retention
and includes onboard crystal oscillators, trace antenna, passive
Stop: 60 nA with XRES wakeup
components, and the Cypress PSoC 4 BLE. Refer to the
PSoC 4 BLE datasheet for additional details on the capabilities Programmable Analog
of the PSoC 4 BLE device used on this module.
Four opamps with reconfigurable high-drive external and
The EZ-BLE Creator module is a scalable and reconfigurable high-bandwidth internal drive, comparator modes, and ADC
platform architecture. It combines programmable and input buffering capability; can operate in Deep-Sleep mode
reconfigurable analog and digital blocks with flexible automatic
12-bit, 1-Msps SAR ADC with differential and single-ended
routing. The CYBLE-214015-01 also includes digital
modes; channel sequencer with signal averaging
programmable logic, high-performance analog-to-digital
Two current DACs (IDACs) for general-purpose or capacitive
conversion (ADC), opamps with comparator mode, and standard
sensing applications on any pin
communication and timing peripherals.
One low-power comparator that operate in Deep-Sleep mode
The CYBLE-214015-01 includes a royalty-free BLE stack
compatible with Bluetooth 4.2 and provides up to 25 GPIOs in a
Programmable Digital
small 11 11 1.80 mm package. The CYBLE-214015-01 is
Four programmable logic blocks called universal digital blocks,
drop-in compatible with the CYBLE-014008-00 and
(UDBs), each with eight macrocells and datapath
CYBLE-214009-00 EZ-BLE Modules.
Cypress-provided peripheral Component library, user-defined
The CYBLE-214015-01 is a complete solution and an ideal fit for
state machines, and Verilog input
applications seeking a highly integrated BLE wireless solution.
Capacitive Sensing
Module Description
Cypress CapSense Sigma-Delta (CSD) provides best-in-class
Module size: 11.0 mm 11.0 mm 1.80 mm (with shield)
SNR (> 5:1) and liquid tolerance
Drop-in compatible with CYBLE-014008-00 and
Cypress-supplied software component makes
CYBLE-214009-00
capacitive-sensing design easy
256-KB flash memory, 32-KB SRAM memory
Automatic hardware-tuning algorithm (SmartSense)
Up to 25 GPIOs configurable as open drain high/low,
Segment LCD Drive
pull-up/pull-down, HI-Z analog, HI-Z digial, or strong output
LCD drive supported on all GPIOs (common or segment)
Bluetooth 4.2 qualified single-mode module
Operates in Deep-Sleep mode with four bits per pin memory
QDID: 79480
Serial Communication
Declaration ID: D029646
Two independent runtime reconfigurable serial communication
Certified to FCC, CE, MIC, KC, and ISED regulations
2
blocks (SCBs) with I C, SPI, or UART functionality
Industrial temperature range: 40 C to +85 C
Timing and Pulse-Width Modulation
32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit
Four 16-bit timer, counter, pulse-width modulator (TCPWM)
multiply, operating at up to 48 MHz
blocks
Watchdog timer with dedicated internal low-speed oscillator
Center-aligned, Edge, and Pseudo-random modes
(ILO)
Comparator-based triggering of Kill signals for motor drive and
Two-pin SWD for programming
other high-reliability digital logic applications
Power Consumption Up to 25 Programmable GPIOs
Any GPIO pin can be CapSense, LCD, analog, or digital
TX output power: 18 dbm to +3 dbm
Received signal strength indicator (RSSI) with 1-dB resolution
TX current consumption of 15.6 mA (radio only, 0 dbm)
RX current consumption of 16.4 mA (radio only)
Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600
Document Number: 002-15923 Rev. *E Revised March 12, 2018CYBLE-214015-01
More Information
Cypress provides a wealth of data at www.cypress.com to help you to select the right module for your design, and to help you to
quickly and effectively integrate the module into your design.
Overview: EZ-BLE Module Portfolio, Module Roadmap Knowledge Base Articles
KBA210574 - RF Regulatory Certifications for CY-
PSoC 4 BLE Silicon Datasheet
BLE-014008-00, CYBLE-214009-00, and CY-
Application notes: Cypress offers a number of BLE application
BLE-214015-01 EZ-BLE Creator Modules
notes covering a broad range of topics, from basic to advanced
KBA216236 - Pin Mapping Differences Between the
level. Recommended application notes for getting started with
EZ-BLE Creator Evaluation Board (CYBLE-214015-
EZ-BLE modules are:
EVAL) and the BLE Pioneer Kit (CY8CKIT-042-BLE)
AN96841 - Getting Started with EZ-BLE Module
KBA97095 - EZ-BLE Module Placement
AN91267 - Getting Started with PSoC 4 BLE
KBA213976 - FAQ for BLE and Regulatory Certifications with
AN97060 - PSoC 4 BLE and PRoC BLE - Over-The-Air EZ-BLE modules
(OTA) Device Firmware Upgrade (DFU) Guide
KBA210802 - Queries on BLE Qualification and Declaration
AN91162 - Creating a BLE Custom Profile Processes
AN91184 - PSoC 4 BLE - Designing BLE Applications KBA2108122 - 3D Model Files for EZ-BLE/EZ-BT Modules
AN92584 - Designing for Low Power and Estimating Battery
Development Kits:
Life for BLE Applications
CYBLE-214015-EVAL, CYBLE-214015-01 Evaluation Board
AN85951 - PSoC 4 CapSense Design Guide
CY8CKIT-042-BLE, Bluetooth Low Energy (BLE) Pioneer
AN95089 - PSoC 4/PRoC BLE Crystal Oscillator
Kit
Selection and Tuning Techniques
CY8CKIT-002, PSoC MiniProg3 Program and Debug Kit
AN91445 - Antenna Design and RF Layout Guidelines
Test and Debug Tools:
Technical Reference Manual (TRM):
CYSmart, Bluetooth LE Test and Debug Tool (Windows)
PSoC 4 BLE Technical Reference Manual
CYSmart Mobile, Bluetooth LE Test and Debug Tool
PSOC(R) 4 BLE Registers Technical Reference Manual
(Android/iOS Mobile App)
Two Easy-To-Use Design Environments to Get You Started Quickly
PSoC Creator Integrated Design Environment (IDE)
PSoC Creator is an Integrated Design Environment (IDE) that enables concurrent hardware and firmware editing, compiling and
debugging of PSoC 3, PSoC 4, PSoC 5LP, PSoC 4 BLE, and EZ-BLE module systems with no code size limitations. PSoC peripherals
are designed using schematic capture and simple graphical user interface (GUI) with over 120 pre-verified, production-ready PSoC
Components.
PSoC Components are analog and digital virtual chips, represented by an icon that users can drag-and-drop into a design and
configure to suit a broad array of application requirements.
Bluetooth Low Energy Component
The Bluetooth Low Energy Component inside PSoC Creator provides a comprehensive GUI-based configuration window that lets you
quickly design BLE applications. The Component incorporates a Bluetooth Core Specification v4.2 compliant BLE protocol stack and
provides API functions to enable user applications to interface with the underlying Bluetooth Low Energy Sub-System (BLESS)
hardware via the stack.
EZ-Serial BLE Firmware Platform
The EZ-Serial Firmware Platform provides a simple way to access the most common hardware and communication features needed
in BLE applications. EZ-Serial implements an intuitive API protocol over the UART interface and exposes various status and control
signals through the modules GPIOs, making it easy to add BLE functionality quickly to existing designs.
Use a simple serial terminal and evaluation kit to begin development without requiring an IDE. Refer to the EZ-Serial web page for
User Manuals and instructions for getting started as well as detailed reference materials.
EZ-BLE modules are pre-flashed with the EZ-Serial Firmware Platform. If you do not have EZ-Serial pre-loaded on your module, you
can download each EZ-BLE modules firmware images on the EZ-Serial web page.
Technical Support
Frequently Asked Questions (FAQs): Learn more about our BLE ECO System.
Forum: See if your question is already answered by fellow developers on the PSoC 4 BLE.
Visit our support page and create a technical support case or contact a local sales representatives. If you are in the United States,
you can talk to our technical support team by calling our toll-free number: +1-800-541-4736. Select option 2 at the prompt.
Document Number: 002-15923 Rev. *E Page 2 of 42