ESD101-B1-02 Series Protection device TVS (transient voltage suppressor) Bi-directional, 5.5 V, 0.1 pF, 0201, 0402, RoHS and halogen free compliant Features ESD/transient protection of high speed data lines according to: - IEC61000-4-2 (ESD): 14 kV (air), 12 kV (contact) - IEC61000-4-4 (EFT): 1.5 kV/30 A (5/50 ns) - IEC61000-4-5 (surge): 2 A (8/20 s) Bi-directional working voltage up to: V = 5.5 V RWM Extremely low capacitance C = 0.1 pF (typical) at f = 1 GHz L Clamping voltage: V = 30 V (typical) at I = 16 A with R = 1.5 (typical) CL TLP DYN Very low reverse current: I < 0.1 nA R Small form factor SMD sizes 0201 and 0402 low profile Bi-directional and symmetric I/V characteristics for optimized design/assembly Potential applications Tailored for ESD protection of capacitance-susceptible application like: Super high speed interface RF antenna For further application information please refer to application note AN327 3 . Product validation Qualified for industrial applications according to the relevant tests of JEDEC47/20/22 Device information Pin 1 marking (lasered) Pin 1 Pin 1 Pin 2 Pin 2 Figure 1 Pin configuration and schematic diagram Table 1 Part information Type Package Configuration Marking code ESD101-B1-02ELS TSSLP-2-4 1 line, bi-directional R ESD101-B1-02EL TSLP-2-20 1 line, bi-directional R Datasheet Please read the Important Notice and Warnings at the end of this document Revision 1.4 www.infineon.com 2017-10-26ESD101-B1-02 Series Protection device Table of contents Table of contents Features . 1 Potential applications 1 Product validation 1 Device information . 1 Table of contents . 2 1 Maximum ratings . 3 2 Electrical characteristics 4 3 Typical characteristic diagrams . 6 4 Package information 11 4.1 TSSLP-2-4 . 11 4.2 TSLP-2-20 12 5 References 13 Revision history . 13 Disclaimer 14 Datasheet 2 Revision 1.4 2017-10-26