FM25V02 256-Kbit (32 K 8) Serial (SPI) F-RAM 256-Kbit (32 K 8) Serial (SPI) F-RAM Features Functional Description 256-Kbit ferroelectric random access memory (F-RAM) The FM25V02 is a 256-Kbit nonvolatile memory employing an logically organized as 32 K 8 advanced ferroelectric process. A ferroelectric random access 14 High-endurance 100 trillion (10 ) read/writes memory or F-RAM is nonvolatile and performs reads and writes similar to a RAM. It provides reliable data retention for 151 years 151-year data retention (See the Data Retention and Endurance table) while eliminating the complexities, overhead, and system-level reliability problems caused by serial flash, EEPROM, and other NoDelay writes nonvolatile memories. Advanced high-reliability ferroelectric process Unlike serial flash and EEPROM, the FM25V02 performs write Very fast serial peripheral interface (SPI) operations at bus speed. No write delays are incurred. Data is Up to 40-MHz frequency written to the memory array immediately after each byte is Direct hardware replacement for serial flash and EEPROM successfully transferred to the device. The next bus cycle can Supports SPI mode 0 (0, 0) and mode 3 (1, 1) commence without the need for data polling. In addition, the Sophisticated write protection scheme product offers substantial write endurance compared with other Hardware protection using the Write Protect (WP) pin nonvolatile memories. The FM25V02 is capable of supporting 14 10 read/write cycles, or 100 million times more write cycles Software protection using Write Disable instruction than EEPROM. Software block protection for 1/4, 1/2, or entire array These capabilities make the FM25V02 ideal for nonvolatile Device ID memory applications, requiring frequent or rapid writes. Manufacturer ID and Product ID Examples range from data collection, where the number of write Low power consumption cycles may be critical, to demanding industrial controls where the 220 A active current at 1 MHz long write time of serial flash or EEPROM can cause data loss. 90 A (typ) standby current The FM25V02 provides substantial benefits to users of serial 5 A sleep mode current EEPROM or flash as a hardware drop-in replacement. The FM25V02 uses the high-speed SPI bus, which enhances the Low-voltage operation: V = 2.0 V to 3.6 V DD high-speed write capability of F-RAM technology. The device Industrial temperature: 40 C to +85 C incorporates a read-only Device ID that allows the host to determine the manufacturer, product density, and product Packages revision. The device specifications are guaranteed over an 8-pin small outline integrated circuit (SOIC) package industrial temperature range of 40 C to +85 C. 8-pin thin dual flat no leads (DFN) package For a complete list of related documentation, click here. Restriction of hazardous substances (RoHS) compliant Logic Block Diagram WP Instruction Decoder CS Clock Generator Control Logic HOLD Write Protect SCK 32 K x 8 F-RAM Array Instruction Register 15 8 Address Register Counter SI SO Data OI/ Register 3 Nonvolatile Status Register Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 001-84494 Rev. *G Revised May 2, 2017FM25V02 Contents Pinouts ..............................................................................3 Maximum Ratings ........................................................... 13 Pin Definitions ..................................................................3 Operating Range ............................................................. 13 Functional Overview ........................................................4 DC Electrical Characteristics ........................................ 13 Memory Architecture ...................................................4 Data Retention and Endurance ..................................... 14 Serial Peripheral Interface SPI Bus ..........................4 Capacitance ....................................................................14 SPI Overview ...............................................................4 Thermal Resistance ........................................................ 14 SPI Modes ...................................................................5 AC Test Conditions ........................................................ 14 Power Up to First Access ............................................6 AC Switching Characteristics ....................................... 15 Command Structure ....................................................6 Power Cycle Timing ....................................................... 17 WREN - Set Write Enable Latch .................................6 Ordering Information ...................................................... 18 WRDI - Reset Write Enable Latch ...............................6 Ordering Code Definitions ......................................... 18 Status Register and Write Protection .............................7 Package Diagrams .......................................................... 19 RDSR - Read Status Register .....................................8 Acronyms ........................................................................21 WRSR - Write Status Register ....................................8 Document Conventions ................................................. 21 Memory Operation ............................................................8 Units of Measure ....................................................... 21 Write Operation ...........................................................8 Document History Page ................................................. 22 Read Operation ...........................................................9 Sales, Solutions, and Legal Information ...................... 23 Fast Read Operation ...................................................9 Worldwide Sales and Design Support ....................... 23 HOLD Pin Operation .................................................10 Products ....................................................................23 Sleep Mode ...............................................................11 PSoC Solutions ...................................................... 23 Device ID ...................................................................11 Cypress Developer Community ................................. 23 Endurance .................................................................12 Technical Support ..................................................... 23 Document Number: 001-84494 Rev. *G Page 2 of 23