Spansion, Inc. and Cypress Semiconductor Corp. have merged together to deliver high-performance, high-quality solutions at the heart of today s most advanced embedded systems, from automotive, industrial and networking platforms to highly interactive consumer and mobile devices. The new company Cypress Semiconductor Corp. will continue to offer Spansion, Inc. products to new and existing customers. Continuity of Specifications There is no change to this document as a result of offering the device as a Cypress product. Any changes that have been made are the result of normal document improvements and are noted in the document history page, where supported. Future revisions will occur when appropriate, and changes will be noted in a document history page. Continuity of Ordering Part Numbers Cypress continues to support existing part numbers. To order these products, please use only the Ordering Part Numbers listed in this document. For More Information Please contact your local sales office for additional information about Cypress products and solutions.S25FL216K 16-Mbit 3.0 V Serial Flash Memory with Uniform 4 kB Sectors Distinctive Features Single power supply operation Flexible Architecture with 4 kB Sectors Full voltage range: 2.7 to 3.6V Sector Erase (4 kB) Block Erase (64 kB) 16-Mbit Serial Flash Page Program up to 256 bytes 16-Mbit/2048 kbyte/9192 pages 100k erase/program cycles typical 256 bytes per programmable page 20-year data retention typical Uniform 4-kbyte Sectors/64-kbyte Blocks Software and Hardware Write Protection Standard and Dual Write Protect all or portion of memory via software Standard SPI: SCK, CS , SI, SO, WP , HOLD Enable/Disable protection with WP pin Dual SPI: SCK, CS , SI/IO0, SO, WP , HOLD Fast Read Dual Output instruction High Performance Program/Erase Speed Auto-increment Read capability Page program time: 1.6 ms typical Sector erase time (4 kB): 45 ms typical High Performance Block erase time (64 kB): 450 ms typical FAST READ (Serial): 65 MHz clock rate Chip erase time: 12 seconds typical DUAL OUTPUT READ: 65 MHz clock rate Package Options Low Power Consumption 8-pin SOIC 150/208-mil 12 mA typical active current All Pb-free packages are RoHS compliant 15 A typical standby current General Description The S25FL216K device is a 16-Mbit, 2048-kbyte Serial Flash memory, with advanced write protection mechanisms. The S25FL216K supports the standard Serial Peripheral Interface (SPI), and a high performance Dual output using SPI pins: Serial Clock, Chip Select, Serial SI/IO0, SO, WP , and HOLD . SPI clock frequencies of up to 65 MHz are supported. The S25FL216K array is organized into 8,192 programmable pages of 256 bytes each. Up to 256 bytes can be programmed at a time. Pages can be erased in groups of 16 (4-kB Sector Erase), groups of 256 (64-kB Block Erase) or the entire chip (Chip Erase). The S25FL216K has 512 erasable sectors and 32 erasable blocks. The small 4 kB sectors allow for greater flexibility in applications that require data and parameter storage. A Hold pin, Write Protect Pin and programmable write protection provide further control flexibility. Additionally, the S25FL216K device supports JEDEC standard manufacturer and device identification. Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 002-00719 Rev. *J Revised September 24, 2015