Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.com S25FS064S 64 Mbit (8 Mbyte), 1.8 V FS-S Flash Features Serial Peripheral Interface (SPI) with Multi-I/O Security Features SPI Clock polarity and phase modes 0 and 3 One Time Program (OTP) array of 1024 bytes Double Data Rate (DDR) option Block Protection: Extended Addressing: 24- or 32-bit address options Status Register bits to control protection against program or erase of a contiguous range of sectors. Serial Command subset and footprint compatible with S25- FL1-K, S25FL-P and S25FL-S SPI families Hardware and software control options Multi I/O Command subset and footprint compatible with Advanced Sector Protection (ASP) S25FL1-K S25FL-P and S25FL-S SPI families Individual sector protection controlled by boot code or Read password Commands: Normal, Fast, Dual Output, Dual I/O, Quad Out- Option for password control of read access put, Quad I/O, DDR Quad I/O Technology Modes: Burst Wrap, Continuous (XIP), QPI (QPI) Cypress 65 nm MirrorBit Technology with Eclipse Archi- Serial Flash Discoverable Parameters (SFDP) and Common tecture Flash Interface (CFI), for configuration information. Single Supply Voltage with CMOS I/O Program 1.7 V to 2.0 V 256 or 512 Bytes Page Programming buffer Program suspend and resume Temperature Range Automatic ECC -internal hardware Error Correction Code Industrial ( 40 C to +85 C) generation with single bit error correction Industrial Plus ( 40 C to +105 C) Erase Extended (40 C to +125 C) Automotive, AEC-Q100 Grade 3 (40 C to +85 C) Hybrid sector option Automotive, AEC-Q100 Grade 2 (40 C to +105 C) Physical set of eight 4KB sectors and one 32KB sector at the top or bottom of address space with all remaining sec- Automotive, AEC-Q100 Grade 1 (40 C to +125 C) tors of 64KB Packages (all Pb-free) Uniform sector option 8-lead SOIC 208 mil (SOC008) Uniform 64KB or 256KB blocks for software compatibility LGA 5x6 mm (W9A008) with higher density and future devices BGA-24 6 8 mm Erase suspend and resume 5 5 ball (FAB024) footprint Erase status evaluation Cycling Endurance 100,000 Program-Erase Cycles, minimum Data Retention 20 Year Data Retention, minimum Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 002-03631 Rev. *G Revised December 13, 2019