Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.comS29AL016J 16-Mbit (2M 8-Bit/1M 16-Bit), 3 V, Boot Sector Flash Distinctive Characteristics Architectural Advantages Performance Characteristics Single Power Supply Operation High Performance Full voltage range: 2.7 to 3.6 volt read and write operations Access times as fast as 55 ns for battery-powered applications Automotive, AEC-Q100 Grade 3 (40C to +85C) Manufactured on 110 nm Process Technology Automotive, AEC-Q100 Grade 1 (40C to +125C) Fully compatible with 200 nm S29AL016D Industrial temperature range (40C to +85C) Secured Silicon Sector region Extended temperature range (40C to +125C) Ultra Low Power Consumption (typical values at 5 MHz) 128-word/256-byte sector for permanent, secure identifica- tion through an 8-word/16-byte random Electronic Serial 0.2 A Automatic Sleep mode current Number accessible through a command sequence 0.2 A standby mode current May be programmed and locked at the factory or by the cus- 7 mA read current tomer 20 mA program/erase current Flexible Sector Architecture Cycling Endurance: 1,000,000 cycles per sector typical One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and thirty-one 64 Data Retention: 20 years typical Kbyte sectors (byte mode) One 8 Kword, two 4 Kword, one 16 Kword, and thirty-one 32 Package Options Kword sectors (word mode) Sector Group Protection Features 48-ball Fine-pitch BGA A hardware method of locking a sector to prevent any program 64-ball Fortified BGA or erase operations within that sector 48-pin TSOP Sectors can be locked in-system or via programming equip- ment Software Features Temporary Sector Unprotect feature allows code changes in previously locked sectors CFI (Common Flash Interface) Compliant Unlock Bypass Program Command Provides device-specific information to the system, allowing host software to easily reconfigure for different Flash devices Reduces overall programming time when issuing multiple program command sequences Erase Suspend/Erase Resume Top or Bottom Boot Block Configurations Available Suspends an erase operation to read data from, or program data to, a sector that is not being erased, then resumes the Compatibility with JEDEC standards erase operation Pinout and software compatible with single-power supply Data Polling and Toggle Bits Flash Provides a software method of detecting program or erase Superior inadvertent write protection operation completion Hardware Features Ready/Busy Pin (RY/BY ) Provides a hardware method of detecting program or erase cycle completion Hardware Reset Pin (RESET ) Hardware method to reset the device to reading array data WP input pin For boot sector devices: at V , protects first or last 16 Kbyte IL sector depending on boot configuration (top boot or bottom boot) Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 002-00777 Rev. *Q Revised June 21, 2018