Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.comS70FS01GS 1-Gb (128 MB), 1.8 V FS-S Flash Features SPI with Multi-I/O Security Features SPI Clock polarity and phase modes 0 and 3 OTP array of 1024 Bytes DDR Block Protection: Extended Addressing: 24- or 32-bit address options Status Register bits to control protection against program or erase of a contiguous range of sectors. Serial Command subset and footprint compatible with S25FL1-K, S25FL-P, and S25FL-S SPI families Hardware and software control options Multi I/O Command subset and footprint compatible with Advanced Sector Protection (ASP) S25FL-P, S25FL1-K, and S25FL-S SPI families Individual sector protection controlled by boot code or Read password Commands: Normal, Fast, Dual I/O, Quad I/O, DDR Quad I/O Option for password control of read access Modes: Burst Wrap, Quad Peripheral Interface (QPI) Technology Serial Flash Discoverable Parameters (SFDP) and Common Cypress 65 nm MirrorBit Technology with Eclipse Architec- Flash Interface (CFI), for configuration information. ture Program Single Supply Voltage with CMOS I/O 256 or 512 Bytes Page Programming buffer 1.7V to 2.0V Program suspend and resume Temperature Range Automatic Error Correcting Code (ECC) internal hardware ECC with single bit error correction Industrial ( 40 C to +85 C) Industrial Plus ( 40 C to +105 C) Erase Automotive, AEC-Q100 Grade 3 (40 C to +85 C) Hybrid sector option Automotive, AEC-Q100 Grade 2 (40 C to +105 C) Physical set of eight 4 KB sectors and one 224 KB sector Automotive, AEC-Q100 Grade 1 (40 C to +125 C) at the top or bottom of address space with all remaining sectors of 256 KB Packages (all Pb-free) Uniform sector option 16-lead SOIC 300 mil Physical uniform 256 KB blocks BGA-24 6 8 mm Erase suspend and resume 5 5 ball footprint Erase status evaluation 100,000 Program-Erase Cycles on any sector, minimum 20 year data retention, minimum Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 002-03833 Rev. *E Revised December 14, 2018