TLE9252VLCXUMA1 Infineon

TLE9252V High-Speed CAN FD Transceiver 1 Overview Features Fully compliant to ISO 11898-2 (2016) and SAE J2284-4/-5 Reference device and part of Interoperability Test Specification for CAN Transceiver Guaranteed loop delay symmetry to support CAN FD data frames up to 5MBit/s Bus Wake-up Pattern (WUP) function with optimized filter time (0.5s - 1.8s) for worldwide OEM usage Excellent ESD robustness +/-10kV (HBM) and +/-9kV (IEC 61000-4-2) Very low current consumption in Sleep Mode of max. 25A Extended supply range on V and V supply CC IO Dual Power Supply Solution via V and V for robust behavior during battery cranking BAT CC Fail safe features like TxD time-out, RxD Recessive Clamping and Overtemperature shut-down Very low electromagnetic emission (EME) for chokeless usage CAN short circuit proof to ground, battery and V CC Undervoltage detection on V , V and V BAT CC IO Autonomous bus biasing according to ISO 11898-2 (2016) Bus Wake-up (WUP) and Local Wake-Up (LWU) INH output to control external circuity Improved robust local failure diagnosis via NERR output pin Green Product (RoHS compliant) Potential Applications Infotainment applications Cluster Modules Radar applications HVAC Datasheet 1 Rev. 1.11 www.infineon.com/automotive-transceiver 2019-10-17TLE9252V High-Speed CAN FD Transceiver Overview Product validation Qualified for automotive applications. Product validation according to AEC-Q100. Description The TLE9252V is a transceiver designed for HS CAN networks up to 5 Mbit/s in automotive and industrial applications. As an interface between the physical bus layer and the CAN protocol controller, the TLE9252V drives the signals to the bus and protects the microcontroller against interferences generated within the network. Based on the high symmetry of the CANH and CANL signals, the TLE9252V provides very low electromagnetic emission allowing the operation without a common mode choke. The non-low power modes (Normal-operating Mode and Receive-only Mode) and low power modes (Sleep Mode and Stand-by Mode) are optimized for reduced current consumption based on the required functionality. Even in Sleep Mode with a quiescent current below 25 A over the full temperature range, the TLE9252V is able to detect a Wake-Up Pattern (WUP) on the HS CAN bus. The V voltage reference input is used to support 3.3 V and 5 V supplied IO microcontrollers. The TLE9252V is integrated in an RoHS compliant PG-DSO-14 or PG-TSON-14 package and fulfills the requirements of the ISO11898-2 (2016). Type Package Marking TLE9252VSK PG-DSO-14 9252V TLE9252VLC PG-TSON-14 9252V Datasheet 2 Rev. 1.11 2019-10-17