KTU1001AEVA-TR Kinetic Technologies

Datasheet Brief KTU1001A For full datasheet, click HERE. USB D+/D- Hi-Speed or SBU1/2 Switch with Fault Protection Features Brief Description Operating Range: 2.7V to 5.5V The KTU1001A is a Hi-Speed (up to 480Mbps) USB dual For USB D+/D- Hi-Speed or SBU1/2 signals SPDT (single-pole/double-throw) switch with overvoltage USB Hi-Speed Dual SPDT Switch/MUX protection. This device operates over a 2.7V to 5.5V input Reverse blocking back-to-back MOSFETs supply range with over voltage fault protection up to 20V. >1GHz -3db Bandwidth USB Type-C features high voltage charging where the Low 6 Switch On-Resistance KTU1001A protects USB data lines from short circuit and Typical 4.0pF Switch On-Capacitance surge events that can permanently damage the mobile Overvoltage Protection system. The device features independent control bits for Up to +20VDC each switch pair and an on/off enable (EN) for shutdown Surge Protection Up to +25V mode. Additional features include low switch on resistance Switch Resistance to ground: 5M typ and capacitance along with a fault flag (FLAG) to alert the FLAG open drain output overvoltage indicator system processor to overvoltage fault events. EN to disable switch output Similar in features and performance to KTU1000, the WLCSP34-12 package (1.17mm x 1.57mm) KTU1001A adds reverse blocking MOSFET switch -40C to +85C Temperature Range functionality. The KTU1001A has low power consumption and is Applications available in an ultra-small 12-Bump 1.17mm x 1.57mm WLCSP package making it an ideal solution for USB interface switching and protection in mobile applications. Smartphones USB Type-C Mobile Internet Devices Tablet Computers Peripherals Typical Application VCC VBUS KTU1001A SYSTEM NC1 COM1 D+ USB XCVR 1 NC2 D+/D D COM2 Switches NO1 USB PORT USB XCVR 2 NO2 EN CB1 Interface Applications Logic CB2 Processor FLAG June 2019 - Revision 04e Page 1 Company Confidential Datasheet Brief KTU1001A Ordering Information Operating 1 Part Number Marking Package Temperature KTU1001AEVA-TR LQXXYYZZZZ -40C to +85C WLCSP-12 1. XXYYZZZZ is the date code, assembly code and serial number. Kinetic Technologies cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Kinetic Technologies product. No intellectual property or circuit patent licenses are implied. Kinetic Technologies reserves the right to change the circuitry and specifications without notice at any time. June 2019 - Revision 04e Page 2 Company Confidential