DS-112-PIN MACOM

DS-112 / DS-312 Four-Way Power Divider Rev. V6 10-500 MHz Features FP-5 (DS-112) Low Loss: 0.6 dB Typical High Isolation: 30 dB Typical Low VSWR: 1.2:1 Typical Impedance: 50 Ohms Nominal Maximum Power Rating or Input Power: 1W Max. Internal Load Dissipation: Ds-112 -0.05 W Max. DS-312 0.25 Watts Max. MIL-STD-202 Screening Available Description A Power Divider is ideally a lossless reciprocal device which can also perform vector summation of two or more signals and thus is sometimes called a power combiner or summer. C-14 (DS-312) Pin Configuration (DS-112) Pin No. Function Pin No. Function 1 GND 8 Output 2 None 9 GND 3 None 10 Output 4 Input 11 GND 5 GND 12 Output 6 None 13 GND 7 GND 14 Output 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: DS-112 / DS-312 Four-Way Power Divider Rev. V6 10-500 MHz 1 DS-112 Electrical Specifications : T = -55C to +85C A Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 10 - 400 MHz dB 0.75 400 - 500 MHz dB 0.85 Isolation 10 - 500 MHz dB 25 Amplitude Balance 10 - 500 MHz dB 0.2 Phase Balance 10 - 500 MHz 5 VSWR All Ports 10 - 25 MHz Ratio 1.5:1 25 - 500 MHz Ratio 1.35:1 1 DS-312 Electrical Specifications : T = -55C to +85C A Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 10 - 400 MHz dB 0.75 400 - 500 MHz dB 0.85 Isolation 10 - 500 MHz dB 25 Amplitude Balance 10 - 500 MHz dB 0.2 Phase Balance 10 - 500 MHz 2 VSWR All Ports 10 - 400 MHz Ratio 1.5:1 400 - 500 MHz Ratio 1.35:1 1. All specifications apply with 50 ohm source and load impedance. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: