DSS-333-PIN MACOM

DSS-333 Surface Mount Two-Way Power Divider, Rev. V3 10 - 500 MHz Features SF-1 Fully Hermetic Package o Phase Balance: 0.5 Typical Isolation: 40 dB Typical Midband VSWR: 1.05:1 Typical Midband Impedance: 50 Ohms Nominal Maximum Power Rating or Input Power: 1 Watt Max. Internal Load Dissipation: 0.05 Watts Max. MIL-STD-202 Screening Available Description A Power Divider is ideally a lossless reciprocal device which can also perform vector summation of two or more signals and thus is sometimes called a power combiner or summer. Pin Configuration Pin No. Function Pin No. Function 1 IN 3 GND 2 Output C 4 Output D 1 Electrical Specifications : T = -55C to +85C A Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 10 - 500 MHz dB 0.6 Isolation 10 - 500 MHz dB 25 Amplitude Balance 10 - 500 MHz dB 0.15 Phase Balance 10 - 500 MHz 2 VSWR All Ports 10 - 500 MHz Ratio 1.4:1 1. All specifications apply with 50 ohm source and load impedance. This product contains elements protected by United States Patent Number 3,428,920. 1 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: DSS-333 Surface Mount Two-Way Power Divider, Rev. V3 10 - 500 MHz Typical Performance Curves Insertion Loss Isolation VSWR Ordering Information Part Number Package DSS-333 PIN SF-1 2 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: