JH- / JHS-114 / JH-133 Quadrature Hybrid, Rev. V3 20 - 40 MHz Features FP-2 (JH-114) Octave Bandwidth o o 3 Maximum Phase Deviation from 90 Low Loss: 0.5 dB Max. Impedance: 50 Ohms Nominal Input Power: 5 Watts Max. 25C, Derated to 1 o Watt 100 C o Typical Phase Linearity: 3 from Straight Line MIL-STD-202 Screening Available Description 3 dB Hybrids are ideal for dividing a signal into two o signals of equal amplitude and a constant 90 or o 180 phase differential and for Quadrature combining or performing summation/differential combining. SF-1 (JHS-114) TO-8-2 (JH-133) 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions North America Tel: 800.366.2266 Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, India Tel: +91.80.4155721 China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. JH- / JHS-114 / JH-133 Quadrature Hybrid, Rev. V3 20 - 40 MHz 1 Electrical Specifications : T = -55C to +85C A Parameter Test Conditions Frequency Units Min Typ Max 2 Insertion Loss Less Coupling 20 - 40 MHz dB 0.5 Isolation 20 - 40 MHz dB 20 Amplitude Balance 20 - 40 MHz dB 0.75 VSWR 20 - 40 MHz Ratio 1.2:1 Deviation from 20 - 40 MHz 3 Quadrature 1. All specifications apply with 50 ohm source and load impedance. 2. Average of coupled output less 3 dB. This product contains elements protected by United States Patent Number 3,484,724. Phasing Diagram Pin Configuration (JH-114) OUT A B C D Pin No. Function Pin No. Function IN 1 A 5 D A ISO 0 -90 2 GND 6 GND B ISO -90 0 3 GND 7 GND 4 B 8 C C 0 90 ISO D -90 0 ISO Pin Configuration (JHS-114) All other pins and case are ground. Pin No. Function Pin No. Function Pin Configuration (JH-133) 1 A 3 D 2 B 4 C Pin No. Function Pin No. Function 1 GND 7 GND 2 B 8 D 3 GND 9 GND 4 GND 10 GND 5 A 11 C 6 GND 12 GND 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions North America Tel: 800.366.2266 Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, India Tel: +91.80.4155721 China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.