MAAV-007088 PIN Diode Based Variable Rev. V2 Attenuator, 50 - 1000 MHz Features Functional Schematic High Dynamic Range: 42dB Typical Flat Attenuation vs. Frequency High P1dB Compression Operates on a Single +5V Supply: 50 Ohm Nominal Impedance Lead-Free SOW-16 Package 100% Matte Tin Plating over Copper Halogen-Free Green Mold Compound 260C Reflow Compatible RoHS* Compliant Version of AT10-0019 Description M/A-COM s MAAV-007088-000100 is a Voltage Controlled PIN diode based attenuator packaged in a low cost, 16 lead wide body plastic SMT package. The PIN diode design makes this part well suited for applications where low distortion or high linear operating power levels are required. These attenuators are ideal for gain control in multi-channel digital communications systems. Pin Configuration Ordering Information Pin No. Function Pin No. Function Part Number Package 1 GND 9 GND MAAV-007088-000100 Bulk Packaging 2 RF IN 10 V CONTROL MAAV-007088-0001TR 1000 piece reel 3 GND 11 GND MAAV-007088-0001TB Sample Test Board 4 GND 12 GND 5 GND 13 GND Note: Reference Application Note M513 for reel size information. 6 GND 14 GND 7 V SUPPLY 15 RF OUT 8 GND 16 GND * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAV-007088 PIN Diode Based Variable Rev. V2 Attenuator, 50 - 1000 MHz 1 Electrical Specifications: T = 25C, Z = 50 A 0 Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Vcont.: +10 V 50 - 1000 MHz dB 2.4 2.8 Dynamic Range Vcont.: 0 V 50 - 1000 MHz dB 33 42 Attenuation Attenuation: 0 to 20 dB 50 - 1000 MHz dB 1.0 1.5 Flatness Attenuation: 20 to 30 dB 50 - 1000 MHz dB 1.5 2.0 VSWR Vcont.: 0 - 10V 50 - 1000 MHz Ratio 1.7:1 2.1:1 Trise, Tfall 10%/90%, 90%/10% s 10 20 Ton, Toff 50% Cntl to 90%/10% RF s 15 25 Transients In-band mV 150 250 1 dB Vcont.: 0 - 10V 100 MHz dBm 10 13 Compression 500 MHz dBm 17 20 1000 MHz dBm 21 24 Input IP Vcont.: 0 - 10V 100 MHz dBm 24 27 3 Two-tone inputs up to +10 dBm 1000 MHz dBm 34 37 V V +4.75 +5.0 +5.25 CC I V = 5.25 V DC mA 2 2.5 CC CC Control Current DC mA 2.7 3.5 1. Unit requires external .01 F DC Blocks on RF lines. 2,3 Absolute Maximum Ratings Parameter Absolute Maximum Max. Input Power Pad Layout 50 - 500 MHz +24 dBm 500 - 1000 MHz +30 dBm Voltages V -1 V to +7.0 V CC Control Voltage -1 V to +15 V MAAV-007088-000100 Operating Temperature -40C to +85C PAD LAYOUT Storage Temperature -65C to +125C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. Handling Procedures Dimensions are in inches Please observe the following precautions to avoid All undefined pins are connected to ground damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: