MAFL-011077 CATV Diplex Filter Rev. V2 5 - 85 / 102 - 1218 MHz Features Functional Schematic 75 Surface Mount Technology RoHS* Compliant Description The MAFL-011077 is a surface mount diplex filter designed for the CATV applications, DTV, and DBS applications. 1,2 3 Ordering Information Pin Configuration Pin Number Function Part Number Package 1 - 6, 8, 10-17, 19, 20 Ground MAFL-011077-PPR 200 piece reel 7 High Pass Port MAFL-011077-SMBPPR Sample Board 9 Low Pass Port 1. Reference Application Note M513 for reel size information. 2. All sample boards include 3 loose parts. 18 Common Port 3. MACOM recommends connecting unused package pins to ground. Electrical Specifications: +25C, Z = 75 0 Parameter Test Conditions Units Min. Typ. Max. 5 - 85 MHz 1.0 1.24 Insertion loss 102 - 105 MHz dB 1.4 1.6 105 - 1218 MHz 1.0 1.2 5 - 85 MHz 48 55 85 - 102 MHz 26 28 Filter Isolation dB 102 - 1002 MHz 43 50 1002 - 1218 MHz 43 50 5 - 85 MHz 22 24 Filter Return Loss (all ports) 102 - 750 MHz dB 22 24 750 - 1218 MHz 21 24 83.5 - 85.0 MHz 8 82.0 - 83.5 MHz 6 Group Delay 109.275 - 112.855 MHz ns 10 115.275 - 118.855 MHz 8 121.2625 - 124.843 MHz 6 * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. 1 MACOM Technology Solutions Inc. (MACOM ) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. For further information and support please visit: MAFL-011077 CATV Diplex Filter Rev. V2 5 - 85 / 102 - 1218 MHz 4,5 Absolute Maximum Ratings Handling Procedures Parameter Absolute Maximum Please observe the following precautions to avoid damage: RF Power 1000 mW DC Current 30 mA Static Sensitivity Operating Temperature -40C to +85C These electronic devices are sensitive to electrostatic discharge (ESD) and can be damaged Storage Temperature -20C to +125C by static electricity. Proper ESD control techniques 4. Exceeding any one or combination of these limits may cause should be used when handling these devices. permanent damage to this device. 5. MACOM does not recommend sustained operation near these survivability limits. Recommended PCB Configuration Dimensions in mm. Tolerance: .x 0.1, .xx 0.05 2 MACOM Technology Solutions Inc. (MACOM ) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. For further information and support please visit: